Wine Filtering & Fining

Let’s face it, sometimes despite your best efforts your wine just will not clear. It’s times like these you need to call in the reinforcements. For the Master Vintners out there, we have pump fed filter systems to quickly remove the particulate from you wine. If you are looking for a slightly more economical option we offer several additives that can be added directly to your wine such as Super Kleer and Bentonite.

Showing 1–20 of 120 results

  • Riptide Brewing Pump

    Riptide Brewing Pump

    $199.99

    Features:

    Strong rare earth magnets and a curved blade impeller provide 7 GPM and up to 21 ft of lift
    Tri-Clamp head disassembles easily for cleaning
    1/2″ NPT inlet and outlet
    Motor is enclosed in a splash proof and super quiet case
    Rotatable stainless steel head
    Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
    Linear flow valve provided for excellent flow control
    Power switch on base
    9 ft. long power cord with 120V plug

    Quick View
  • Sanitary Filter

    Sanitary Filter

    $3.99

    An inline sanitary filter that filters down to .027 micron with a 99.99% efficiency. Use it anywhere you need to keep something sanitary. Both 1/4″ and 3/8″ tubing will attach and it will snugly fit in any standard stopper as well. Check out this list of suggested uses:
    Airlock: The most common use might be as an airlock on any kind of fermenter. Unlike other small sanitary filters, this unit fits perfectly into a stopper. Works great for conical fermenters, like the Fermentap and our own Stainless Conicals, where displacement air is taken in when samples are taken or trub is dumped. Using the sanitary filter as airlock also eliminates the concern of drawing air back in as hot liquid cools and contracts in a fermenter. Not appropriate for long term storage of beer or wine as it is not an oxygen barrier.

    Inline Aeration/Oxygenation Filter: With an oxygenation or aeration sytem, such as our FE375 or FE380, it will filter contaminants out of oxygen or air. It is connected inline between pump/O2 tank and s/s diffusion stone.

    Hand Pumps: Some breweries use this filter with the breweries hand pump system. Air going back into the cask is sanitized through this filter. This has extended shelf life of Real Ales by up to 2 weeks!

    CO2 Filtration: Used inline with your CO2 Kegging setup, this piece can be used to filter out any potential contaminants from your CO2 Tank.

    Storage: Store in Ziplock bag in a dry place with minimal moisture exposure. Can last up to 1 year. Discard if there are any signs of discoloration.

    About the inline filters: There are two sides to the filter – an “in” and an “out”. The direction you use doesn’t matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don’t try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the “In” of the filter and store in a zip-lock bag.
    STORE DRY AT ALL TIMES. DO NOT SANITIZE FILTER.

    Quick View
  • Plate Filter

    Plate Filter

    $49.99

    Our Plate Filter has a larger surface area, which means more yeast and particulate extraction.

    Each filtering session requires two pads at a time, and each pad must be the same micron to work. The product is pushed into the housing at 5 PSI and passes on either side of the filter housing, then gets forced through the pads to the center, where it is pushed out into your awaiting collection vessel, such as a keg or tank.

    Quick View
  • Pre-Screen Filter –..

    Pre-Screen Filter –..

    $24.99

    Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants.

    Features 1/2 inch barbs on the in and out sides. The clear plastic cover is removable for cleaning or replacement of the screen.

    Quick View
  • Beer and Wine Plate Filte..

    Beer and Wine Plate Filte..

    $62.99

    Most breweries and wineries use a large plate filter system to achieve clear product. Now you can do the same at home with two corny kegs. Our Beer and Wine Plate Filter Kit has a larger surface area, which means more yeast and particulate extraction than our cartridge filter, and comes with our plate filter, two disposable filter pads, tubing, flare fittings, and two flare beverage ball locks. Each filtering session requires two pads at a time, and each pad must be the same micron to work. The beer or wine is pushed out of the keg and into the housing at 5 PSI, where it passes on either side of the filter housing, then gets forced from the center through the pads, where it is then pushed out into your clean keg. The rough sides of both filters should be facing each other on the inside of the filter, so the smooth sides face outward.

    Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters. These pads are not designed to be back flushed and reused and should be used in one session.

    Quick View
  • BevBright™ .45 Micron A..

    BevBright™ .45 Micron A..

    $59.99

    High quality, absolute rated.45 micron absolute filter with a hard caged body and gasketed ends. Thermally bonded end caps and ultrasonic welded media seams for a one piece construction. Absolute rated at 99.99% efficiency to remove bacteria for sterile filtering. Ideal for filtering white wine that has not completed a full malolactic fermentation. Filters meet FDA Title 21 regulations for beverage contact. Will work with our 10 inch cannister filter.

    What makes this filter really unique is the PES layer membrane with defined .45 micron hole size. This layer will not allow material to pass that is over .45 in size. This PES layer is also what makes this cartridge considerably more expensive than spun poly filters.

    Wine to be filtered should already be very clear as this wine will load up quickly with material. It is a common practice to prefilter with a 1 micron spun poly filter and then filter with this .45 micron absolute filter.

    Quick View
  • Water Filter Kit – ..

    Water Filter Kit – ..

    $42.99

    This water filter kit features a 10″ carbon block filter that removes all chlorine and organic flavor. Kit includes 10″ housing, one carbon block filter, garden hose attachment, barbed fittings and 6′ of 3/8″ vinyl tubing. The carbon block should be replaced after filtering approximately 800 gallons of water or after 1 year of use, whichever comes first. Filter should be disassembled and stored dry when not in use.

    NOTE: This product should not be used in hot water applications. Cold water only!

    This product includes a carbon filter and is designed to filter water only (Carbon filters should not be used to filter beer or wine).

    Quick View
  • Beer and Wine Filtering K..

    Beer and Wine Filtering K..

    $49.99

    Install inline between two ball lock Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg. This kit is designed to filter out particles down to 1 micron, which is considered fine filtration. At one micron beer will be clear after filtration provided you do not have a starch haze. The beer and wine filtering kit comes with one 10″ filter housing, a 1 micron 10″ spun poly sediment filter, fittings for connection to the filter housing, 3′ of beverage line, clamps, and two beverage out ball lock quick disconnects.

    Spun-polypropylene filters are disposable filters and cannot be cleaned or used more than once. However, you can filter multiple kegs with one filter. 5-10 micron is considered rough filtration, 3 micron will remove most yeast, and 1 micron filtration will remove almost all yeast. Standard filter cartridges are rated nominal (will filter out 80-85% of matter at given rating).

    Quick View
  • 3 Plate Mini Jet Filter

    3 Plate Mini Jet Filter

    $199.99

    The Buon Vino Mini Jet has been designed with the small quantity winemaker in mind. It is the perfect way for the home hobbyist to produce a wine with a commercial shine. Perfect for the home winemaker who filters 23L (5 Gallons) at a time from kits. Its compact design incorporates a self-prime motorized pump capable of filtering up to 5 gallons in 15 minutes. A built in drip tray and drainage tube ensure a no mess, no fuss clean-up job. And its triple filter pads add a crystal clear, sparkling quality to your wine.

    Sold individually in a box. Filter pads not included.

    Quick View
  • 3 Plate Super Jet Filte..

    3 Plate Super Jet Filte..

    $399.99

    Developed for home wine makers who make 40 gallons plus per year from grapes, berries or fresh juice, the Super Jet filters approximately 71 gallons/hour, producig a professional-level brilliance and sparkle. Includes a self-priming diaphragm pump.

    Quick View
  • 6 Plate Super Jet Filter

    6 Plate Super Jet Filter

    $599.99

    Similar to the Super Jet but with twice the number of filter pads, theBuon Vino 6-Pad Wine Filter is perfect the the home winemaker who wishes to filter higher volumes between pad changes.

    The 6-Pad has been designed with ease and quality in mind. Wine is drawn by means of a self-prime pump into the plastic filtering plates which house the filter pads. The specially designed grooves on the plastic filtering plates direct the wine through the filter pads, allowing the unit to achieve optimum filtering capability.

    Ideal for the home wine makers who make wine from grapes, berries or fresh juice and produces 60Gal – plus per year.

    Technical Specifications:

    self-prime pump
    filtering surface 2400 square cm
    filtering time: 1 hour per 270 litres (approximate)
    3 grades of pads: coarse, polish, and sterilizing
    dimensions: 51 cm (length) x 26 cm (width) x 46 cm (height)
    weight: 14 kilograms
    C.S.A. approved
    Remember to Pre-Filter!

    Quick View
  • 6 Plate Wine Filter W/ No..

    6 Plate Wine Filter W/ No..

    $1,199.99

    20 x 20 cm Plate and Frame filters offer a great, efficient way to filter volumes from about 60 gallons up through 600 gallons (depending on the number of plates).

    These filters feature stainless steel frames for long-term durability, and Noryl fitler plates which can be steam-sterilized. Plate gaskets are constructed from silicone.

    The built-in 0.5 HP centrifugal pump is perfectly suited to pushing through filter sheets without overpowering the system.

    Filter capacity is 10-15 gallons per plate.

    Features:
    304 Stainless Steel Construction
    Built-in stainess steel centrifugal pump
    Food-Grade, steam-sterilizable Noryl plates included.
    Built-in pressure gauge
    Up to 270L (71 gal) Flow rate per hour
    400 x 285 x 355mm
    51 lbs
    1.5″ Tri-Clamp inlet and outlet

    Quick View
  • 10 Plates Filter (20×..

    10 Plates Filter (20×..

    $1,599.99

    20 x 20 cm Plate and Frame filters offer a great, efficient way to filter volumes from about 60 gallons up through 600 gallons (depending on the number of plates).

    These filters feature stainless steel frames for long-term durability, and Noryl fitler plates which can be steam-sterilized. Plate gaskets are constructed from silicone.

    The built-in 0.5 HP centrifugal pump is perfectly suited to pushing through filter sheets without overpowering the system.

    Filter capacity is 10-15 gallons per plate.

    Features:
    304 Stainless Steel Construction
    Built-in stainess steel centrifugal pump
    Food-Grade, steam-sterilizable Noryl plates included.
    Built-in pressure gauge
    Expandable to 20 plates
    Up to 300L (79 gal) Flow rate per hour
    620x420x560mm / 24×16.5×22 inches
    66 lbs
    1.5″ Tri-Clamp inlet and outlet

    Quick View
  • Pre-Screen Filter –..

    Pre-Screen Filter –..

    $22.99

    Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants.

    Features 3/4 inch barbs on the in and out sides. The clear plastic cover is removable for cleaning or replacement of the screen.

    Quick View
  • 20 Plates Wine Filter W/ ..

    20 Plates Wine Filter W/ ..

    $1,699.99

    20 x 20 cm Plate and Frame filters offer a great, efficient way to filter volumes from about 60 gallons up through 600 gallons (depending on the number of plates).

    These filters feature stainless steel frames for long-term durability, and Noryl fitler plates which can be steam-sterilized. Plate gaskets are constructed from silicone.

    The built-in 0.5 HP centrifugal pump is perfectly suited to pushing through filter sheets without overpowering the system.

    Filter capacity is 10-15 gallons per plate.

    Features:
    304 Stainless Steel Construction
    Built-in stainess steel centrifugal pump
    Food-Grade, steam-sterilizable Noryl plates included.
    Built-in pressure gauge
    Expandable to 20 plates
    Up to 600L (158 gal) Flow rate per hour
    620x420x560mm/24×16.5×22 inches
    90 lbs
    1.5″ Tri-Clamp inlet and outlet

    Quick View
  • MKII High Temp Magnetic D..

    MKII High Temp Magnetic D..

    $59.99

    An amazing little pump from “down under”. It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger but with a sealed case that is more water resistant. The optional stainless steel head (PMP501) is a very nice upgrade and one that most customers choose.

    Specifications:
    Made from Polysulfone
    110v/60hz
    11.15 ft. (3.4 m) max head
    5 Gal/min max flow
    Max temperature – 248 F/ 120 C
    1/2 inch fittings

    Quick View
  • Sparkolloid

    Sparkolloid

    $2.99$239.99

    Sparkolloid is an amazing wine clarifier made of poly-saccharides mixed with diatomaceous earth. Use 1 tsp per gallon. Boil Sparkalloid with 1 cup of water for 15 minutes and add to fermenter. Wait 1-2 weeks before racking.

    A rough approximate of weight is 1 tsp = 1.1 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

    Quick View
  • 40 Plates Wine Filter W/ ..

    40 Plates Wine Filter W/ ..

    $2,099.99

    20 x 20 cm Plate and Frame filters offer a great, efficient way to filter volumes from about 60 gallons up through 600 gallons (depending on the number of plates).

    These filters feature stainless steel frames for long-term durability, and Noryl fitler plates which can be steam-sterilized. Plate gaskets are constructed from silicone.

    The built-in 0.5 HP centrifugal pump is perfectly suited to pushing through filter sheets without overpowering the system.

    Filter capacity is 10-15 gallons per plate.

    Features:
    304 Stainless Steel Construction
    Built-in stainess steel centrifugal pump
    Food-Grade, steam-sterilizable Noryl plates included.
    Built-in pressure gauge
    Expandable to 20 plates
    Up to 1200L (317 gal) Flow rate per hour
    940x480x590mm/37x19x23 inches
    114 lbs
    1.5″ Tri-Clamp inlet and outlet

    Quick View
  • Topsflo TD5 Micro Pump

    Topsflo TD5 Micro Pump

    $169.99

    A 24v magnetic drive brewing pump. Key features of this pump is that it is compact and very quiet. Some brewers also like the safety factor of it being 24v. Also works well with electric brewing systems. Power is not an issue power with a max flow rate of 6.4gpm. Comes with a silicone rubber mounting bracket that can be mounted almost anywhere. Pump head is made of 304 stainless steel.

    Topsflo is the actual manufacturer of the pump but it is sold under a few different brand names by other USA retailers and wholesalers.

    Features:

    Made from food grade stainless steel
    120 to 24 v power adapter
    1/2 in NPT inlet and outlet
    Works with high temperatures (110 C/ 230 F)
    Max flow rate of 6.4 gpm
    Max head of 19 ft
    Small compact design
    Automatic over voltage shutoff
    Comes with mounting bracket
    Dimensions (pump only):

    3 3/4 in Height
    4 3/4 in Length
    3 1/4 in Width
    1.875 lbs

    Quick View
  • Chugger Pump with High Te..

    Chugger Pump with High Te..

    $159.99

    The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we’ve been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling!

    The Chugger pump has 1/2″ mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360? (in 90? intervals) allowing for even more customization!

    Features:

    Stainless Steel Pump Head.
    Food Grade up to 250? F.
    1/2″ mpt inlet and outlet.
    High Flow rate of 7 gpm
    Max Head 18.9 ft
    115v 55″ cord and plug attached.
    50/60 Hz, 1.4 amp
    1/20 HP, 3500 RPM
    No more issues with crossthreading plastic heads or snapping off fittings.
    Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2″ silicone tubing, we recommend our 5/8″ barb (H620), to help ensure a better seal!

    Quick View
X