Wine Bottle Fillers for Wine Making | Moonshiners.club

Bottle Fillers

Showing 1–20 of 48 results

  • Blichmann BeerGun Accesso..

    Blichmann BeerGun Accesso..

    $29.99

    Connect your Blichmann BeerGun Bottle Filler to a ball lock keg and CO2 tank with this accessory kit. You may also need to split your gas line using a stainless flare tee.

    Quick View
  • Blichmann BeerGun V2

    Blichmann BeerGun V2

    $99.99

    In 2005 the BeerGun? bottle filler revolutionized the way homebrewers bottled their kegged beer. Complicated counter-pressure fillers were obsoleted, and bottling became effortless and enjoyable! The patented BeerGun? bottle filler became the overwhelmingly dominant filler of choice and we’ve helped tens of thousands of homebrewers bottle beer and win countless brewing awards. Something we’re very proud of. But at Blichmann Engineering we listen to homebrewers! We’ve taken your feedback and have created the New BeerGun? bottle filler! More ergonomic, faster and easier to clean, and even more intuitive!

    What’s new?

    Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve
    Positively retained beer seal tip – no more lost tips!
    Anti-microbial beer hose keeps contamination at bay!
    Accessory kit now included as standard item
    Includes a convenient plastic tool case
    Tool free super fast disassembly
    Made in the USA!

    Quick View
  • Ferrari automatic bottle ..

    Ferrari automatic bottle ..

    $16.99

    This slick unit can be used for bottling both still & sparkling wine. The filler has a tapered fitting that accommodates 5/16”, 3/8” & 1/2” siphon hoses. To use, simply attach the siphon hose to the spigot on the bottling bucket & filler unit, turn the spigot on, push the button on the filler & the filling begins! When the bottle is full, the unit automatically shuts off. The rubber piece that goes into the bottle can be moved to adjust the fill level. The nut on the top of the unit allows regulation of the flow.

    Quick View
  • Inert Gas Bottle Sparger

    Inert Gas Bottle Sparger

    $39.99

    Keep your wine from oxidizing! This is one of the most prized possessions of our in-house wine maker. He uses Argon because of its high molecular weight, but CO2 will work. From extended macerations (he gasses before and after laying plastic wrap over the cap) to topping up storage tanks (he uses before setting the floating lid), this is a great way to make sure no excess oxygen is getting into your wine. This can be also used to purge any tank before filling with the wine. Designed to mate with an H550B Quick disconnect installed in the standing end of your 5/16″ gas line (H550B and gas line not included).

    Quick View
  • Semiautomatic Shutoff Tap..

    Semiautomatic Shutoff Tap..

    $4.99

    This tap will restrict the flow of liquid unless pushed against the mouth of a bottle or jar with narrow neck. Easily bottle or transfer your product with minimal spillage using this device. Best used in conjuction with a siphon.

    Quick View
  • Wine Bottle Filler (Mople..

    Wine Bottle Filler (Mople..

    $79.99

    Get the functionality of a 3 spout gravity filler for a fraction of the price. These fillers are a great alternative to more expensive fillers, while still allowing you to bottle at a quick rate. For a more robust model in Stainless Steel, see our WE602.

    These 3 spout models have an internal float mechanism to keep the reservoir full. 3 individual nozzles allow for independent filling of bottles.

    Quick View
  • Counter Pressure Bottle F..

    Counter Pressure Bottle F..

    $59.99

    Flush and fill from the bottom of the bottle with an all-stainless filler! Our new design on counter pressure filling features a special valve on top that allows CO2 or beer to flow down the same stainless tube, directly to the bottom of the bottle. The result is a more effective purging of oxygen and fresher tasting beer. The valve has three positions, off, beer and CO2. The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4″ tubing.

    Beer barb is 3/16″. Gas barb is 5/16″.

    Quick View
  • Deluxe Counter Pressure B..

    Deluxe Counter Pressure B..

    $79.99

    We think our Counter Pressure Filler is the best on the market and the Deluxe Counter Pressure Filler takes a proven design to the next level by adding a pressure gauge for monitoring bottle pressure and flared connections for easy cleaning.

    The gauge allows you to know the pressure in your bottle, an incredibly handy feature. The flared connections allow for easy cleaning as you can connect on or disconnect your lines in a matter of seconds. Traditionally these lines can be difficult to sanitize because they were permanently connected with hose clamps.

    Flush and fill from the bottom of the bottle with an all-stainless filler! Our new design on counter pressure filling features a special valve on top that allows CO2 or beer to flow down the same stainless tube, directly to the bottom of the bottle. The result is a more effective purging of oxygen and fresher tasting beer. The valve has three positions, off, beer and CO2. The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4″ tubing.

    Still has all the great features of our Original:

    All Stainless Construction (except for a brass backing on the pressure gauge)
    A true Counter Pressure Filler (for less foaming)
    Easy to use Stainless 3-way ball valve on top
    Adjustable Stainless pressure release on side
    Flushes bottle from the bottom not the top
    Beer barb is 1/4″. Gas barb is 5/16″.

    Quick View
  • Counter Pressure Accessor..

    Counter Pressure Accessor..

    $32.99

    Everything you need to use your counter-pressure filler. Connects your new Counter Pressure filler to your existing ball lock kegging system with a convenient, included, plastic inline quick-disconnect.

    Includes:

    Hardware to connect filler to gas system: Gas line tee, quick disconnect set (see Gas and Beverage quick disconnect sets on preceding page.), 6′ of gas line.

    Hardware to connect filler to keg: Threaded, black beverage out qd, related flare fittings, 5′ of beer line

    To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You’re ready to fill.

    *Note:
    If you have a pin lock keg you will need to purchase our Pin Lock Beverage Out – Flare fitting KEG760 .

    Quick View
  • Bottle Filler Wand –..

    Bottle Filler Wand –..

    $3.99

    3/8 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 3/8 in ID plastic tubing.

    Quick View
  • Bottle Filler Wand –..

    Bottle Filler Wand –..

    $3.99

    Takeout spring bottle fillers allow you to use either with the spring, for automatic shutoff when you lift the tube, or as a springless filler that fills automatically whent he tube is set down in a botttle. Use with 3/8 in ID plastic tubing.

    Quick View
  • Bottle Filler Wand –..

    Bottle Filler Wand –..

    $4.99

    1/2 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 1/2 in ID plastic tubing.

    Quick View
  • Bottle Filler Wand –..

    Bottle Filler Wand –..

    $4.99

    Takeout spring bottle fillers allow you to use either with the spring, for automatic shutoff when you lift the tube, or as a springless filler that fills automatically whent he tube is set down in a botttle. Use with 1/2 in ID plastic tubing.

    Quick View
  • Blichmann BeerGun Bottle ..

    Blichmann BeerGun Bottle ..

    $4.99

    Replacement tip for the Blichmann BeerGun Bottle Filler

    Quick View
  • Blichmann BeerGun Bottle ..

    Blichmann BeerGun Bottle ..

    $8.99

    Replacement Brush for the Blichmann BeerGun Bottle Filler

    Quick View
  • Replacement Clip and Seat..

    Replacement Clip and Seat..

    $9.99

    Replacement clip and seat for the Blichmann BeerGun Bottle Filler. Fits all models of the Blichmann BeerGun.

    Quick View
  • Bottle Filler – Buo..

    Bottle Filler – Buo..

    $29.99

    The Buon Vino Super Automatic Bottle Filler allows for quick and easy filling of wine bottles for the home winemaker. The bottle filler is easily primed and is self-leveling and self-deactivating to help prevent accidental overflow. The specially designed tapered tip cascades wine into the bottle. In order to fill additional bottles, you need simply remove the automatic filler from the first bottle and place it into the next, pushing down on the activation lever to continue the wine flow.

    How it works?

    Usage: To use the filler, place the device on top of the bottle to be filled, insert the intake tube into your vessel containing the liquid, and the small overflow tube into an empty bottle. To begin the siphon, start by pressing down on the center plunger on the flow regulator to open the valve. Suck on the end of the overflow tube until the liquid begins to flow into the bottle. When liquid is flowing into the bottle, put the overflow tube back into the empty bottle. When the liquid reaches the top of the bottle, the valve will shut the flow off automatically.

    After the first bottle, check the level of the fill and adjust the level up or down if necessary by moving the rubber bottle seal up or down. Please note that the fill level can be affected by excessive foaming. After one bottle is filled, move the bottle filler to another empty bottle, push down on the plunger lever, and repeat.

    Quick View
  • 3 Spout Bottle Filler ..

    3 Spout Bottle Filler ..

    $499.99

    The 3 spout stainless steel bottle filler features professional level performance, at a hobbyist price point. It allows you to fill bottles to a consistant level every time, automatically stopping the flow when the liquid reaches the preset level. This is purely a mechanical, gravity flow system. There is no electricity or pumps used. The fill height can be adjusted by varying the height of the float valve, and by adjusting the stainless steel bottle rest.

    The 3 spout stainless steel bottle filler includes a rubber bulb siphon starter to start the flow of wine in the individual spouts. The input tube is 5/8″ diameter, you will need 5/8″ ID (inside diameter) tubing from your container to the filler. Tubing is not included and must be purchased separately.

    This item ships diretcly from Manufaturer, it may take few weeks for order to be prepared.

    Quick View
  • 5 Spout Bottle Filler ..

    5 Spout Bottle Filler ..

    $599.99

    The 5 spout stainless steel bottle filler features professional level performance, at a hobbyist price point. It allows you to fill bottles to a consistant level every time, automatically stopping the flow when the liquid reaches the preset level. This is purely a mechanical, gravity flow system. There is no electricity or pumps used. The fill height can be adjusted by varying the height of the float valve, and by adjusting the stainless steel bottle rest.

    The 5 spout stainless steel bottle filelr includes a rubber bulb siphon starter to start the flow of wine in the individual spouts. The input tube is 5/8″ diameter, you will need 5/8″ ID (inside diameter) tubing from your container to the filler. Tubing is not included and must be purchased separately.

    Ships diretcly from Manufacturer, may take few weeks before it?s ready to ship.

    Quick View
  • Gasket for 3 and 5 spout ..

    Gasket for 3 and 5 spout ..

    $2.99

    Replacement gasket for 3 and 5 spout bottle fillers. This gasket attaches to the end of the bottle filler tube, with the wide, flat “brim” of the gasket pressed against the inside of the resevoir.

    Usage tips:
    The gasket should be fitted onto the the filler tube until it stops, it should not be pushed on all the way. The stainless steel tube should not be protruding all the way through the gasket. For the best seal, the gasket should be positioned so that the flat “bottom” surface if the gasket is parallel to the flat side of the resevoir. The round ridge around the outside of the gasket should be depressed evenly when seated on the side wall.

    Dimensions:
    The inside of the gasket measures .39″, or about 3/8″ diameter. The width of the body of the gasket is 0.7″ (not including the flange)

    Quick View
X