Thermometers

Ensuring your temperatures are correct during each step in winemaking will keep your wine on the road to success. Monitor your temperatures with this selection of thermometers.

Showing all 16 results

  • 1Refrigerator Thermometer..

    1Refrigerator Thermometer..

    $6.99

    Know at a glance the temperature of your kegerator, refrigerator or freezer! This thermometer measures 4.75″ L x 1.5″ T x 0.75″ D.

    Reads from -20?F to 70?F.

    Aluminum thermometer panel for long product life. Glass tube thermometer. Suction cups for mounting.

    Quick View
  • Blichmann ThruMometer 1/2..

    Blichmann ThruMometer 1/2..

    $29.99

    When wort is too cold, you get long lag times and increased opportunities for bacterial infection. When it?s too hot, off-flavors can form. Blichmann Engineering?s patented ThruMometer? lets you get it just right ? letting you adjust wort and water flow rates in your counterflow heat exchanger to dial in an exact temperature, with no more guesswork! Available to fit 3/8″ ID hose and 1/2″ ID hose. Plus, use only the water you need ? good for the environment and your wallet!

    Quick View
  • Blichmann ThruMometer 3/8..

    Blichmann ThruMometer 3/8..

    $29.99

    The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it’s being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58?F – 88?F, and has 3/8″ in and out posts.

    Note- Clean with mild detergent only, using warm (no hotter than 140?F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

    Quick View
  • Fermentap Thermometer (3i..

    Fermentap Thermometer (3i..

    $16.99

    A great thermometer at a great price! These thermometers have a 3″ Face, a 2.5″ Probe, and a 1/2″ MPT on the back. The 2.5″ Probe works great in a boil kettle or hot liquor tank, however may be too short for a mash tun. Please see our MT514 for the same thermometer with a 6″ probe.

    Quick View
  • Fermentap Thermometer (3i..

    Fermentap Thermometer (3i..

    $18.99

    A great thermometer at a great price! These thermometers have a 3″ Face, a 6″ Probe, and a 1/2″ MPT on the back. The 6″ Probe works great in a Mash Tun, however may be too long for a boil kettle if you use an immersion chiller. Please see our MT512 for the same thermometer with a 2.5″ probe.

    Quick View
  • Fermometer – LCD Ad..

    Fermometer – LCD Ad..

    $4.99

    LCD thermometer with adhesive for use on fermenters, buckets, etc. 44?86?F

    Quick View
  • Floating Thermometer R..

    Floating Thermometer R..

    $6.99

    Floating glass thermometer is great for mashing, monitoring wort temperature for yeast pitching, and of course, making cheese. The sealed glass housing can float in liquid, making it easy to monitor the temperature.

    Packed individualy in plain white paperboard boxes. Master pack quantity is 200 per case.
    Individual box dimensions: 9″L x 7/8″W x 7/8″D. Master pack: 18.25″L x 9.75″W x 9.75″H

    Quick View
  • High Quality Thermometer ..

    High Quality Thermometer ..

    $32.99

    Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem.

    This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don’t have to tap the gauge with your finger as much.

    They are also accurate to 1% of the total range, feature a polished 2″ 304 s/s housing, a hermetically sealed water proof case, and glass face. The range is 20-220 Fahrenheit and -10-100 Celsius. The 12″ stem is 1/8″ stainless steel. This is a very different thermometer than some of the other low quality 2″ x 12″ thermometers that are currently on the market.

    Quick View
  • Inline Thermometer –..

    Inline Thermometer –..

    $45.99

    This is the Thermometer half of the FE390. One side has a 3/8″ Barb and the other has a 1/2″ fnpt. Add a H616 barb or use alone or thread on to a 1/2″ npt fitting. It is used to measure the temperature on the outflow side of your counterflow wort chiller.

    How long should I apply oxygen while transferring to the fermenter?

    We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.

    Quick View
  • Kettle Thermometer –..

    Kettle Thermometer –..

    $13.99

    The kettle thermometer is one of our most popular. It is ideal for measuring the temperature during wort production, yeast pitching, cheesemaking, and many other uses.

    The Kettle thermometer features a 2 inch wide face, a 9 inch long probe, and a movable clip that holds the thermometer at approximately a 45 degree angle inside the kettle.

    0-220 degree F range (-15C – 110C). Features a calibration screw behind the face to adjust temperature to a known standard.

    Quick View
  • Pocket Thermometer –..

    Pocket Thermometer –..

    $6.99

    The pocket thermometer is small and compact, but great for measuring temperature in a variety of situations. It has a 1 inch wide face, and a 5 inch long stem. Includes a storage tube with pocket clip, and a calibration nut on the back of the face.

    Quick View
  • Pocket Thermometer –..

    Pocket Thermometer –..

    $6.99

    Capable of reading from 50F – 550F degrees, this pocket thermometer (featuring a 5″ stem) does the job of monitoring roasting coffee quite well. We use this thermometer for our Whirley-Pop roaster: we drill a small hole (5/32 bit) into the top of the roaster and drop this unit it. It hovers 1 inch above the bottom – the perfect height. Includes sleeve and is calibratable via a nut on the back of the dial.

    Quick View
  • Stick-On Thermometer R..

    Stick-On Thermometer R..

    $3.99

    The stick on thermometer is great for monitoring the temperature of refrigerators, fermentation and storage areas, and other spaces. It is relatively small (4 ” tall), and includes a sticky tape back to secure to a wall or other fixture.

    Range is -40 – 120 degrees F (-40 to 50C).

    Quick View
  • Thermometer | 1.5 in. TC ..

    Thermometer | 1.5 in. TC ..

    $29.99

    1.5 in Tri-Clamp thermometer. Made for Ss Brewtech’s Brewmaster Edition Kettles.

    Specifications:

    1.5 in Tri-Clamp
    3 in dial face
    +/- 1% accuracy
    Farenheit and Celcius

    Quick View
  • 12 inch Glass Thermometer..

    12 inch Glass Thermometer..

    $6.99

    12″ glass thermometer. The reading is more accurate than the metal coil-type thermometers, and has a high degree of resolution. 0-220F. Great for brewers to use this as a calibration thermometer.

    Quick View
  • Thermometer Shield

    Thermometer Shield

    $16.99

    A metal shield that protects the thermometer, but still allows for easy reading. Loop on end of shield allows for convenient hanging. Fits both of our calibrating thermometers above.

    Quick View
X