Make sure all of your equipment is completely clean before you sanitize with this assortment of cleaning tools and accessories. From fermentors to bottles to kegs, get everything that touches your homebrew cleaned and sanitized to avoid spoiling it. Used with these cleansers you’ll always be ahead of the curve.
Showing all 17 results
48 Seat Stationary Bottle..
48 Seat Stationary Bottle..$23.99
This bottle tree holds 48 bottles and is an upgrade over traditional bottle trees due to it’s screw together ring sections. Most other bottle trees on the market are just pushed together, and result in some instability. These sections screw together, resulting in a rock solid bottle tree. See our sanitizer injector options below for a complete and inexpensive bottle cleaning setup.
88 Seat Stationary Bottle..
88 Seat Stationary Bottle..$39.99
This bottle tree holds 88 bottles and is an upgrade over traditional bottle trees due to it’s screw together ring sections. Most other bottle trees on the market are just pushed together, and result in some instability. These sections screw together, resulting in a rock solid bottle tree which becomes even more important as you stack more rings. See our sanitizer injector options below for a complete and inexpensive bottle cleaning setup.
Mark II Keg & Carboy ..
Bottle Rinsing or Purging..
Bottle Rinsing or Purging..$39.99
A simple, effective system for rinsing or gas-sparging 750mL or 22oz bottles a case at a time. This base is intended to work in conjuction with the corresponding Bottle Rack (CE971). Features a removeable female Garden Hose fitting on a short hose, which is connected to a 1/2 in plastic barb on the base.
Dimensions: 12.25 in L x10.75 in W x 3 in H
Stainless Steel Bottle Wa..
Bottle & Carboy Washe..
Bottle & Carboy Washe..$12.99
The Blast bottle washer allows you to easily wash bottles, carboys, tubing, and more. Attach to any faucet with a garden hose thread (or use faucet adapter OE495P1) and turn the water on. The internal valve will only spray water when you push down on the the nozzle. One of our favorite “must-have” pieces of equipment.
The Carboy Cleaner
The Carboy Cleaner$29.99
Constructed of a stainless steel rod with two super absorbent, lint free, soft cleaning pads this product is designed to attach to a drill for high rpm use. High-strength, yet flexible plastic inserts inside the pads help keep the pads rigid during use. The expanding sponge at the end of the cleaning pad assists in the centrifugal cleaning force for tough to get debris.
Works with any standard size carboy between 3 and 6 gallons. Works equally well with glass and PET Carboys. Comes with small size bung for glass carboys. Medium size bung for PET carboys can be purchased separately (FE470). Also works great for 5 gallon kegs!
Effectively cleans carboys up to 32 cm / 12.6 inches in diameter.
Ss Brewtech Keg WaSsher
Ss Brewtech Keg WaSsher$219.99
The Ss Brewtech Keg WaSsher offers the homebrewer a convenient way to clean any classic Cornelius-style kegs (Corny or other similar variants). To operate, simply remove the keg?s lid, tilt and insert the spray ball attachment into the keg?s lid opening, and then rotate the keg to secure the lip against the WaSsher?s silicone baseplate seal. Secure the locknut and snug the entire assembly down. Attach the two ball lock quick disconnect fittings to the gas-in and liquid-out postsensuring there are no kinks in the silicone tube. Lastly, turn your keg upside down and put the entire assembly into a standard 5-gallon bucket that contains 2 gallons of your preferred cleaning solution, then activate the pump. Now go grab a beer and relax while the Keg WaSsher does the rest.
No need to disassemble or remove QD posts, dip tubes, or other fittings, all parts are cleaned in place. No more extra-long scrub brushes or elbow grease. Since we designed this washer to fit inside a 5-gallon bucket, you can easily clean kegs in batches by setting up a wash station with 3 discrete buckets to perform cleaning, fresh water rinse, and acid sanitizer cycles. All while leaving the washer attached to a single keg, just jump from one bucket to next until the keg is cleaned, sanitized and ready for use. Since the Keg WaSsher only requires 2 gallons of cleaning solution, the result is less chemical waste and less environmental impact than traditional cleaning methods.
– Hands free operation
– Chemical resistant submersible pump
– Attaches to common ball-lock Cornelius-style kegs w/ removable lids
– Powerful CIP spray ball
– Entire assembly fits in 5-gallon bucket
– Cleans inside of keg and ports simultaneously
– Easily attaches/detaches from kegs
– Perform clean, rinse, and sanitize steps all with the same unit
10 Quart Plastic Pail w/ ..
10 Quart Plastic Pail w/ ..$13.99
Our 10 quart pail with handle (wire bail) is a ideal for use when crushing and pressing grapes, as well as for general usage. It features a pour spout for easy transferring, and molded volume markers on the inside of the pail. It is small enough to fit under the spout of a grape press to collect pressed must, or for transferring grapes or fruit.
FastRack Wine Bottle Dryi..
FastRack Wine Bottle Dryi..$5.99 – $19.99
The FastRack Wine is the cleanest way to drain, stack, and store your empties! When bottling, use the FastRack to dry out your bottles after sanitizing, and have them ready at hand to fill with your delicious homebrew! The FastRack Wine is very condense and takes up far less space than a bottle tree. Use this post consumption as well to help keep all of your bottles in one place ready for rinsing. The FastRack wine works great for 22 oz beer bottles (bombers) or wine bottles.
We sell the Fast Rack in a combo pack, which consists of 1 Tray and 2 Racks and is perfect for a 5 gallon batch, or in the individual components for stacking taller!
2 FastRack Wine Racks will hold 24x 22 oz (750 ml) bottles, a full 5 gallon batch!