Moonshine fermentation equipment | Moonshiners.club - Moonshine supply

Fermentation Equipment

If you are about to make a moonshine, you will definitely need a fermentation equipment to ferment mash. At Moonshiners.club, you can shop for quality fermentation equipment, from plastic containers to steel tanks, from big to small, choose whatever fermentation tank you need.

Showing 1–20 of 277 results

  • 6 Gallon Bucket

    6 Gallon Bucket

    $13.99$14.99

    6-gallon bucket for fermentation, cleaning and sanitizing, and general use. Made of food grade HDPE, lightweight and strong. This bucket has volume markers printed on the side in 1/2 gallon increments, up to 3.5 gallons. There is also a legend noting where 4, 5, and 6 gallons marks should be (measured in inches from the top of the bucket). There is also a “drill dot” printed near the bottom indicating where you should drill to install a spigot. Or you can order with a hole for the spigot.

    Quick View
  • Airlock – 3 Piece

    Airlock – 3 Piece

    $1.99

    3-Piece airlocks from Buon Vino. Simply remove the cap, fill the cylinder about halfway (to the imprinted line) with water or sanitizer, and replace the cap. 3-piece airlocks are easy to clean with an airlock brush if the fermentation back up into the airlock.

    Sold individually, and in cases of 200.

    Quick View
  • Airlock – Plastic &..

    Airlock – Plastic &..

    $13.99

    Large plastic airlock for stainless steel variable capacity tanks, or other containers with a thin lid. Features a threaded shaft with back nut and washer.

    Quick View
  • Airlock – S-Shaped

    Airlock – S-Shaped

    $1.99

    Bubbler, or S-shaped aitlock. Includes plastic cap. Fill with water or sanitizer to the imprinted line, replace the cap, and insert into your fermenter. Ships unassembled (red caps seperate). Sold individually, bulk bag is 100 pieces.

    Quick View
  • Better Bottle™ Carboy

    Better Bottle™ Carboy

    $22.99$24.99

    Better Bottle™ carboys are not like other plastic carboys for homebrewing beer and wine, they’re better! Ideal for home wine making and homebrewing beer, they are lightweight and easy to move around.

    The special PET, used to make Better Bottle™ carboys, is non-absorbing, non-porous, and non-wetting (hydrophobic), so it will not carry over flavors from one batch of wine or beer to the next and it is easier to clean and sanitize than glass or other plastics.

    Quick View
  • PET Plastic Carboy

    PET Plastic Carboy

    $19.99$30.99

    PET carboy for beer or wine. Made of BPA free PET, it will not affect the taste or smell of your product, and will not stain. The PET has a negligible oxygen permeability and so can be used for secondary fermentation. Easy to clean, there are no side-wall ribs to collect yeast or sediment. It is safe to reuse over and over.

    Quick View
  • The Catalyst Fermentation..

    The Catalyst Fermentation..

    $29.99$198.99

    If you could eliminate one chronic homebrewing time-suck, what would it be? How about the Transfer Trap…You know, where you endlessly shift your homebrewed beer from fermenter, to secondary to bottling bucket, to bottles, risking contamination and messy spills at every step.

    The great news is, you can. There’s a better, simpler way: The Catalyst – an ingeniously designed fermentation system from Craft-A-Brew that separates sediment, eliminates transfers and allows you to bottle straight from your fermenter.

    The Catalyst’s tank is made from Tritan™, a food-safe, BPA-free polymer. This revolutionary material retains the same clarity and smoothness of glass, but is resistant to shattering. It is more durable and outlasts the other types plastic typically used in homebrewing. You can even put it and the removable silicone gasket in your dishwasher for easy cleanup. Properly cared for, the tank will last for years to come.

    With The Catalyst Fermentation System, it’s easier than ever to make great beer at home…and look good, AND save time, AND…what are you waiting for? Escape the Transfer Trap and learn some better brewing moves today.

    Quick View
  • #10 Silicone Stopper Ther..

    #10 Silicone Stopper Ther..

    $24.99

    This carboy thermowell is used in conjunction with the Digital Controller, FE601A, FE610A, or FE602, to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5 or 6 gallon PLASTIC carboys or any other similarly sized opening hole. The unit comes with a 15″ stainless steel thermowell and a #10 silicone stopper that will accommodate our sanitary filter, FIL90, as well. It can be used in any container with a stopper opening of this size where you need to accurately monitor and control liquid temperature.

    Will not work with Johnson Temperature Controllers (FE600 or FE611) because the probes are too large.

    Need a thermowell for a glass carboy? Click here.

    Inner Diameter of Thermowell: .255″ Works with new 2016 Rancos

    Quick View
  • 1 BBL – Nano Series..

    1 BBL – Nano Series..

    $1,899.00$2,069.00

    Introducing Ss Brewtech’s line of Nano Series Unitanks designed to bridge the gap between home and professional brewing. 100% TC connections and the ability to carbonate in-vessel make the Nano Series a perfect fit at any Nano Brewery or Micro Brewery looking to do prototype batches.

    Features:

    All connections are fully welded Tri Clamp fittings
    15 psi operating pressure; 30 psi max pressure
    1.5 in Tri Clamp pressure gauge
    3 in Tri Clamp versitile port for dry hopping, CIP, and the pressure relief valve
    1.5 in Tri Clamp sampling valve
    1.5 in Tri Clamp thermowell for LCD thermometer
    1.5 in Tri Clamp carb stone with 3/8 in ball valve
    1.5 in blow off cane with 1.5 in Tri Clamp to 1/2 in NPT ball valve
    8 in Tri Clamp lid with fully welded chiller coil
    Neoprene insulation jacket
    Custom Ss butterfly valves with racking arm
    Stainless lower shelf
    Adjustable feet
    31 gallon operating volume; 42 gallon max volume
    51 in Tall x 28 in wide
    Made from 304 stainless steel

    Quick View
  • 1 Gallon Glass Jug –..

    1 Gallon Glass Jug –..

    $8.49

    Our 1 gallon glass jug is perfect for fermenting mead. To make 1 gallon buy this jar, 3 lbs of honey, 1 oz of yeast nutrient mix, 1 packet of yeast and away you go. It also works great for breaking down 5 gallon batches into 5 different experiments.
    Uses a #6 stopper.

    Quick View
  • 1/2 BBLNano Series Unitan..

    1/2 BBLNano Series Unitan..

    $1,299.00$1,469.00

    Introducing Ss Brewtech’s line of Nano Series Unitanks designed to bridge the gap between home and professional brewing. 100% TC connections and the ability to carbonate in-vessel make the Nano Series a perfect fit at any Nano Brewery or Micro Brewery looking to do prototype batches.

    Features:

    All connections are fully welded Tri Clamp fittings
    15 psi operating pressure; 30 psi max pressure
    1.5 in Tri Clamp pressure gauge
    3 in Tri Clamp versitile port for dry hopping, CIP, and the pressure relief valve
    1.5 in Tri Clamp sampling valve
    1.5 in Tri Clamp thermowell for LCD thermometer
    1.5 in Tri Clamp carb stone with 3/8 in ball valve
    1.5 in blow off cane with 1.5 in Tri Clamp to 1/2 in NPT ball valve
    6 in Tri Clamp lid with fully welded chiller coil
    Neoprene insulation jacket
    Custom Ss butterfly valves with racking arm
    Stainless lower shelf
    Adjustable feet
    15.5 gallon operating volume
    43.5 in Tall x 19 in wide
    Made from 304 stainless steel

    Quick View
  • 1/2 in Stainless Steel Bl..

    1/2 in Stainless Steel Bl..

    $9.49

    3/8 in Stainless Steel Blowoff Cane

    Specifications:

    Stainless steel
    1/2 in outer diameter
    19 in Tall x 7.5 in Wide

    Quick View
  • 14 gal Nano Series Unitan..

    14 gal Nano Series Unitan..

    $1,099.00$1,269.00

    Introducing Ss Brewtech’s line of Nano Series Unitanks designed to bridge the gap between home and professional brewing. 100% TC connections and the ability to carbonate in-vessel make the Nano Series a perfect fit at any Nano Brewery or Micro Brewery looking to do prototype batches.

    Note: This tank does not come with an FTSs package. These are not sold individually and must be purchased alongside the tank as FE887A or FE887B.

    Features:

    All connections are fully welded Tri Clamp fittings
    15 psi operating pressure; 30 psi max pressure
    1.5 in Tri Clamp pressure gauge
    3 in Tri Clamp versitile port for dry hopping, CIP, and the pressure relief valve
    1.5 in Tri Clamp sampling valve
    1.5 in Tri Clamp thermowell for LCD thermometer
    1.5 in Tri Clamp carb stone with 3/8 in ball valve
    1.5 in blow off cane with 1.5 in Tri Clamp to 1/2 in NPT ball valve
    6 in Tri Clamp lid with fully welded chiller coil
    Neoprene insulation jacket
    Custom Ss butterfly valves with racking arm
    Stainless lower shelf
    Adjustable feet
    10 gallon operating volume; 14 gallon max volume
    42.5 in Tall x 17 in wide
    Made from 304 stainless steel
    Note: This product has a minimum advertised price of $1099.

    Quick View
  • 3/16″ ID Silicone T..

    3/16″ ID Silicone T..

    $1.39

    Silicone draft tubing has a number of applications, but our favorite is in barrel top-up systems. The tubing’s high elasticity makes it easy to attach & detach from barbs without cutting the tubing and makes it possible to skip hose clamps in a low pressure (2-3 psi) application. Due to the tubing’s higher-than-vinyl oxygen permeability, we don’t recommend this for permanent installations where it will have product sitting in the lines.

    Approximate OD: 3/8 in. Maximum Working Pressure: 20 psi. Burst Pressure (Room Temp): 60 psi.

    Quick View
  • 3/8 in Stainless Steel Bl..

    3/8 in Stainless Steel Bl..

    $6.99

    3/8 in Stainless Steel Blowoff Cane

    Specifications:

    Stainless steel
    3/8 in inner diameter
    18 in Tall x 7 in Wide

    Quick View
  • 4#7 Stopper Thermowell

    4#7 Stopper Thermowell

    $24.99

    This carboy thermowell is used in conjunction with the Digital Controller, FE601A, FE610A, or FE602, to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5, 6 or 6.5 gallon glass carboys or any other similarly sized opening hole. The unit comes with an 15″ stainless steel thermowell and a #6.5 stopper that will accommodate our sanitary filter, FIL90, as well. It can be used in any container with a stopper opening of this size where you need to accurately monitor and control liquid temperature.

    Will not work with Johnson Temperature Controllers (FE600 or FE611) because the probes are too large.

    Need a thermowell for a plastic carboy? Click here.

    Inner Diameter of Thermowell: .255″ Works with new 2016 Rancos

    Quick View
  • 7 gal Nano Series Unitank..

    7 gal Nano Series Unitank..

    $899.00$1,069.00

    Introducing Ss Brewtech’s line of Nano Series Unitanks designed to bridge the gap between home and professional brewing. 100% TC connections and the ability to carbonate in-vessel make the Nano Series a perfect fit at any Nano Brewery or Micro Brewery looking to do prototype batches.

    Features:

    All connections are fully welded Tri Clamp fittings
    15 psi operating pressure; 30 psi max pressure
    1.5 in Tri Clamp pressure gauge
    3 in Tri Clamp versitile port for dry hopping, CIP, and the pressure relief valve
    1.5 in Tri Clamp sampling valve
    1.5 in Tri Clamp thermowell for LCD thermometer
    1.5 in Tri Clamp carb stone with 3/8 in ball valve
    1.5 in blow off cane with 1.5 in Tri Clamp to 1/2 in NPT ball valve
    6 in Tri Clamp lid with fully welded chiller coil
    Neoprene insulation jacket
    Custom Ss butterfly valves with racking arm
    Stainless lower shelf
    Adjustable feet
    Made from 304 stainless steel

    Quick View
  • Airlock Grommet

    Airlock Grommet

    $1.19

    Rubber Grommet that fits an airlock

    Quick View
  • Breathing Bung #10 –..

    Breathing Bung #10 –..

    $8.99

    The silicone breathing bung can function as an airlock for extended aging of beer and wine. Made of natural white silicone, the bung has vent holes through the center, and a silicone “flapper” that fits tightly against the holes. This allows gasses to escape by pushing up against the flapper, and then the valve shuts protecting the product from contamination.

    #10 breathing bung is recommended for use in PET carboys.

    Quick View
  • Breathing Bung #7 –..

    Breathing Bung #7 –..

    $5.99

    The silicone breathing bung can function as an airlock for extended aging of beer and wine. Made of natural white silicone, the bung has vent holes through the center, and a silicone flapper that fits tightly against the holes. This allows gasses to escape by pushing up against the flapper, and then the valve shuts protecting the product from contamination.

    #7 breathing bung is recommended for use in glass carboys.

    Quick View
X