Wort Chillers for Beer Brewing | Home Brewing Wort Chillers | Moonshiners.club

Wort Chillers

Wort chillers are used to cool the hot wort down to room temperature before you pitch your yeast. Immersion chillers work by first completely submerging the chiller in your kettle and then by flowing cold water through the coils (Make sure to stir your beer as it’s being chilled). The counter flow chillers work by sending the cold water and hot wort in opposite directions through tiny metal channels embedded in metal plates. This chills the wort down extremely quickly and efficiently.

Showing 1–20 of 28 results

  • Blichmann ThruMometer 3/8..

    Blichmann ThruMometer 3/8..

    $29.99

    The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it’s being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58?F – 88?F, and has 3/8″ in and out posts.

    Note- Clean with mild detergent only, using warm (no hotter than 140?F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

    Quick View
  • Copper Heat Exchanger

    Copper Heat Exchanger

    $79.99

    Heat Exchanger 25′ x 1/2″ Copper with 1/2 in. Copper Fittings

    25′ of 1/2″ Copper tubing rolled to a 9″ ID. 10″ OD. 1/2″ FPT copper inlet and outlet. 24″ to the bend to go over the kettle wall.
    Approximately 7″ to the top of the coils.

    Quick View
  • Immersion Wort Chiller 5/..

    Immersion Wort Chiller 5/..

    $129.99

    The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

    50′ of 1/2” copper tubing with connection fittings for garden hoses. Used in kegs and our larger kettles where you brew 5 or 10 gallon batches of beer. The measurements are: Approx. 10″ diameter, 14″ to the top coil, 24″ to the bend to go over the lip of the kettle.

    Quick View
  • Immersion Wort Chiller wi..

    Immersion Wort Chiller wi..

    $129.99

    If you?re tired of wasting time stirring your wort chiller to speed up the cooling process, you might want to try recirculation instead. This Immersion Chiller features a recirculation arm soldered to our popular WC45 SuperChiller, making the best-selling chiller even more effective than ever before. Recirculating you wort can also bring out more hop flavor and wonderful aromas in your IPAs, which is something that every brewer can appreciate.

    This Immersion Chiller features ? inch FPT fitting on the recirculation arm to accommodate a barb, a nipple, or a quick disconnect fitting for more customized connections and easier attachments. Its water inlet is ? inch female garden hose thread, while the water outlet is ? inch male garden hose thread. This makes it easy to attach the chiller to just about any common water source. With high quality copper piping throughout, you won?t find a chiller more durable or more impressive than this one.

    Estimated dimensions are:

    12″ Diameter
    11.5″ To the top coil
    23.5″ To the bend that goes over the kettle lip

    Quick View
  • Pre-Chiller 25′ x 1..

    Pre-Chiller 25′ x 1..

    $79.99

    If you live in a hot environment where the tap water never really gets cold, it may be helpful to pre-chill your water before you even begin chilling your wort. This Pre-Chiller is designed to help you do just that, bringing your tap water down to below the final target temperature for your wort. It uses an impressively simple process to do it, but you?ll find that this is an affordable and essential part of your brewing setup.

    The Pre-Chiller is made up of 25 feet of copper tubing that is placed in a bucket of ice water. The in-flow is connected to the source of your tap water, while the other side is connected to your wort chiller. Once it?s all connected, you can quickly and efficiently cool your water before it even enters the wort chiller.

    The Pre-Chiller is equipped with brass hose fittings that can be attached to any standard garden hose. It is designed to use with our 6 gallon buckets.

    Specifications:
    25 feet of 1/2 inch copper tubing. Female Garden hose inlet, Male Garden hose outlet. Approx. 10″ diameter, 7″ to the top coil, 24″ to the bend to go over the lip of the bucket.

    Quick View
  • Stainless Steel Wort Chil..

    Stainless Steel Wort Chil..

    $59.99

    An affordable wort chiller made from 25′ of 3/8” Stainless Steel tubing. 8′ of vinyl tubing is attached to both the in and the out with a female garden hose fitting on the “water in” side. Use can use our CE20 hose thread adaptor to attach to your sink. Uprights are held together by a single hose clamp rather than welding/soldering.

    Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. By enlarging the photos you can view. As a bonus these actually help turbulate the cooling water to eliminate laminar flow.

    Approx. 10″ diameter, 8″ to the top coil, 15″ to the bend to go over the lip of the kettle.

    Quick View
  • Stainless Steel Wort Chil..

    Stainless Steel Wort Chil..

    $89.99

    An affordable wort chiller made from 50′ of 1/2” Stainless Steel tubing. You can use our CE20 hose thread adaptor to attach to your sink. Uprights are held together by a single hose clamp rather than welding/soldering.

    Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. By enlarging the photos you can view. As a bonus these actually help turbulate the cooling water to eliminate laminar flow.

    Approx. 12.25″ diameter, 10.5″ to the top coil, 23″ to the bend to go over the lip of the kettle.

    Quick View
  • SuperChiller Immersion Wo..

    SuperChiller Immersion Wo..

    $119.99

    If you frequently brew large beer batches and want to speed up your chilling process, there?s no better immersion chiller than the SuperChiller. This incredibly efficient chiller is designed to use with any of our 15 and 26 gallon kettles, but it can really be used with any kettle large enough to accommodate a chiller of this size.

    This SuperChiller measures 50-feet long and is made up of ? inch copper tubing, which is some of the highest quality tubing and cools much faster than other materials. It features connection fittings for standard garden hoses on either end, so you can hook it up to a water supply just about anywhere in or outside of your home. Tightly wound coils stack 12 inches in diameter, and there is even a 23 ?-inch bend at the top to go over the lip of your brew kettle.

    The measurements are: Approx. 12″ diameter, 11 1/2″ to the top coil, 23 1/2″ to the bend to go over the lip of the kettle.

    Quick View
  • Water Efficient Immersion..

    Water Efficient Immersion..

    $79.99

    The Fermentap Wort Chiller is unlike any on the market today.? The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be.? This results in a faster cooling time over chillers with lower coils.

    25′ of 3/8” copper tubing with connection fittings for garden hose. Equipped with new proprietary water turbulation technology making it more water efficient. The measurements are: 10″ dia. 8″ to the top coil. 15″ to the bend to go over the lip of the kettle.

    Quick View
  • Water Efficient Immersion..

    Water Efficient Immersion..

    $79.99

    The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be.? This results in a faster cooling time over chillers with lower coils.

    25′ of 3/8” copper tubing. 8′ of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE20 hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. Equipped with new proprietary water turbulation technology making it more water efficient. This mixes the cooling water as it passes through the chiller so that you get more efficient heat extraction. These Wort Chillers are ideal for our 8 Gallon Heavy Duty Kettles!

    The measurements are: Approx. 10″ diameter, 8″ to the top coil, 15″ to the bend to go over the lip of the kettle.

    Quick View
  • Wort Chiller – Coun..

    Wort Chiller – Coun..

    $229.99

    The inner tube is made from 12′ of 5/8″ convoluted (twisted) copper which continually turbulates the wort as it flows through. The outer tube is made from 7/8″ copper. The Convolutus chiller allows you to pump wort through without having to restrict your pump to slow down flow. Use 1/2″ line to connect to wort in and out feeds. The water connections are male and female 3/4″ hose (GHT) connections.

    10 1/4″ height by 11″ overall diameter (coils themselves are about 6″ in diameter).

    Quick View
  • Wort Chiller – Coun..

    Wort Chiller – Coun..

    $239.99

    We offer our Chillus Convolutus Wort Chiller with threaded 1/2″ fittings on the in and the out. This make connecting with pipe fittings, qd’s or tric-clamp possible. We consider it a must have upgrade on our brewing systems and most customers agree.

    The inner tube is made from 12′ of 5/8″ convoluted (twisted) copper which continually turbulates the wort as it flows through. The outer tube is made from 7/8″ copper. The Convolutus counterflow chiller allows you to pump wort through without having to restrict your pump to slow down flow. Use 1/2″ line to connect to wort in and out feeds. The water connections are male and female 3/4″ hose connections.

    10 1/4″ height by 11″ overall diameter (coils themselves are about 6″ in diameter)

    Quick View
  • Wort Chiller – Imme..

    Wort Chiller – Imme..

    $69.99

    The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

    25′ of 3/8” copper tubing with connection fittings for garden hose. These Wort Chillers are ideal for our 8 Gallon Heavy Duty Kettles!

    The measurements are: 10″ diameter, 8″ to the top coil. 15″ to the bend to go over the lip of the kettle.

    Quick View
  • Wort Chiller – Imme..

    Wort Chiller – Imme..

    $69.99

    The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

    25′ of 3/8” copper tubing. 8′ of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE20 hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. These Wort Chillers are ideal for our 8 Gallon Heavy Duty Kettles!

    The measurements are: Approx. 10″ diameter, 8″ to the top coil, 15″ to the bend to go over the lip of the kettle.

    Quick View
  • Wort Chiller – Supe..

    Wort Chiller – Supe..

    $119.99

    The Fermentap Wort Chiller is unlike any on the market today. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

    50′ of 1/2” copper tubing with connection fittings for garden hoses. Use with converted kegs and most kettles used for 10 gallon batches.

    The measurements are: Approx. 10″ diameter, 13″ to the top coil, 24″ to the bend to go over the lip of the kettle.

    Quick View
  • Counterflow Chiller Caddy..

    Counterflow Chiller Caddy..

    $129.99

    Counterflow chillers are popular among home brewers because they?re so fast and efficient, but no one enjoys the bulky mess that they create when they get tangled up in your hoses and pumps. Well, now we offer something to solve the problems created by your counterflow chiller: a counterflow chiller caddy designed specifically for mounting your beloved chiller!

    Our very own Order Fulfillment Manager, Ryan Barto, designed this handy caddy. It features a hook at the top to hold your tubing sets, rivets for mounting our optional March pump bracket and even wing nuts to help you securely attach the chiller right to the caddy. In order to control the flow rate through the chiller based on its temperature once it exits, Ryan recommends adding a ball valve and thermometer on the output side of the setup. He also notes that you can mount two counter flow chillers on one stand if you?re working on cooling wort for a lager brew.

    WC91 Measurements:

    Height – 27″
    Base Diameter – 8″
    Depth from hose hook to end of mounting arm – 9.5″
    Pump adds 1-1.5″ in overall depth when mounted.

    Quick View
  • Shirron Plate Wort Chille..

    Shirron Plate Wort Chille..

    $109.99

    Made with 11 stainless steel plates that have been fused together with copper solder, these chillers have small channels weaving their way up and down each plate. This creates more surface area for the wort to travel over, and more time for the water to cool the wort down.

    Cleaning a plate chiller is a larger task than a normal immersion chiller, due to the tiny pockets created by the channels in the plates. These pockets can harbor cold break material, hop remains, or any other solid, and if not removed can cause infection in subsequent batches. The best way to clean is to recirculate a solution of hot water and PBW through the chiller as normal, then backflush the chiller, bringing the PBW through the “Wort Out” side in out through the “Wort In” side. This should remove any particulate that may have gotten trapped by the folds in the plates.

    12.5″ long, 3″ wide, and 2″ thick. The wort inlet and outlet is 1/2 Inch Male Pipe Thread, and the water in and out is 3/4 Inch Male Garden Hose Thread.

    Quick View
  • The Chillout – 30 P..

    The Chillout – 30 P..

    $89.99

    The Chillout is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.

    The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer. 1/2 in barbs.

    Set up one side with Wort in & out, and Water out & in on the other side.

    Dimensions: 12.4″ L x 2.9″ W x 2.9″ H

    Quick View
  • Wort Chiller – 40 P..

    Wort Chiller – 40 P..

    $139.99

    40 Plate Wort Chillers

    This plate chiller is equipped with a ? inch MPT wort in and out, as well as a ? inch MPT water in and out. It measures approximately 8.25 inches long, 4 inches high and 3 inches wide.

    Quick View
  • Wort Chiller – Blic..

    Wort Chiller – Blic..

    $224.99

    The Therminator? is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start.

    All 316 stainless steel plates and fittings.
    Chill like the pros, as the Therminator? is identical to commercial brewery chillers.
    Brazed together with pure copper in an oxygen-free furnace, with no potential leaks like a gasketed unit!
    Chill 10 gallons in 5 minutes to 68?F using 58?F cooling water at 5 gallons per minute (gpm).
    Great for southern climates! (See notes on FAQ tab.)
    Ultra compact (7.5″ W, 4″ D, 3″ H)
    Super-low restriction is ideal for gravity feed.
    Easy to clean and sanitize, small enough to boil!*
    Garden-hose thread connections on the water side means no extra adapters to buy!
    1/2″ male NPT fittings on wort side mates up with virtually all common hose-connector types, and they’re easier to sanitize than female fittings!
    With the lowest water consumption on the market, it saves you money!
    Comes with heavy-gauge stainless mounting bracket.
    Blichmann Engineering is committed to continuous product improvement, so design details may change from the photos shown.

    Quick View
X