Tubing and Siphoning

Get what you want where you want it with polyvinyl and high temperature tubing. From regular siphoning to batch sparging, fly sparging to bottling use the right size, tool and temp rating for your application.

Showing 1–20 of 80 results

  • 3/16″ ID Silicone T..

    3/16″ ID Silicone T..

    $1.39

    Silicone draft tubing has a number of applications, but our favorite is in barrel top-up systems. The tubing’s high elasticity makes it easy to attach & detach from barbs without cutting the tubing and makes it possible to skip hose clamps in a low pressure (2-3 psi) application. Due to the tubing’s higher-than-vinyl oxygen permeability, we don’t recommend this for permanent installations where it will have product sitting in the lines.

    Approximate OD: 3/8 in. Maximum Working Pressure: 20 psi. Burst Pressure (Room Temp): 60 psi.

    Quick View
  • Blichmann Inline Oxygenat..

    Blichmann Inline Oxygenat..

    $119.99

    This is a kit of Blichamnn’s Oxygen Flow Regulator along with their inline diffusion stone setup to allow you to add oxygen to your wort inline to further prevent contamination.

    The new Blichmann Engineering™ Oxygen Flow Regulator helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort. Vital to yeast health and the final flavor profile of your beer. Knowing the FLOW is important – other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely. Gone are the days of spray and pray!

    Quick View
  • Blichmann Oxygen Flow Reg..

    Blichmann Oxygen Flow Reg..

    $46.99

    The Oxygen Flow Regulator from Blichmann Engineering™ helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort. Vital to yeast health and the final flavor profile of your beer. Knowing the FLOW is important – other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely. Gone are the days of spray and pray!

    Quick View
  • Hose/Tubing Clamp (Small)..

    Hose/Tubing Clamp (Small)..

    $0.59

    Stainless steel small hose clamp will fit hoses with 1/4″ through 5/8″ OD.

    Quick View
  • Auto Siphon Starter ̵..

    Auto Siphon Starter ̵..

    $10.99

    Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation.

    The Mini Auto Siphon is recommended for use with 1 gallon jugs and small buckets. We recommend you use 5/16 in ID tubing (not 3/8″), it fits tightly but will prevent air leaks from stopping the siphon.

    Quick View
  • Auto-Siphon Starter ̵..

    Auto-Siphon Starter ̵..

    $10.99

    Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation.

    The Regular Auto Siphon is recomended for use with standard buckets and carboys. We strongly recomend you use 5/16 in ID tubing (not 3/8 in) to prevent air leaks from stopping the siphon.

    Quick View
  • Auto-Siphon Starter ̵..

    Auto-Siphon Starter ̵..

    $14.99

    Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation.

    The Large Auto Siphon is recomended for use with standard buckets and carboys. We strongly recomend you use 7/16 in ID tubing (not 1/2 in) to prevent air leaks from stopping the siphon.

    Quick View
  • The Easy Siphon 3/8″..

    The Easy Siphon 3/8″..

    $10.99

    For siphoning out of a carboy or bucket. Comes with 3/8″ cane. 3/8″ tubing must be purchased separately.

    Instructions

    Sanitize and rinse your Easy-Siphon.
    Get the inner tube gasket and the outer tube wet.
    Attach the curved siphon to a hose.
    Submerge the end of Easy-Siphon into your container.
    If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you’re racking to.
    Pull the inner tube up about 7″ until the liquid fills the tube.
    Pump the inner tube down and siphon will begin.
    Pull out inner tube and sanitize Easy-Siphon for storage.

    Quick View
  • The Easy-Siphon 1/2″..

    The Easy-Siphon 1/2″..

    $14.99

    For siphoning out of a carboy or bucket. Comes with 1/2″ cane. It is 27″ long in total with a 25.5″ long tube. 1/2″ tubing must be purchased separately.

    Instructions

    Sanitize and rinse your Easy-Siphon.
    Get the inner tube gasket and the outer tube wet.
    Attach the curved siphon to a hose.
    Submerge the end of Easy-Siphon into your container.
    If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you’re racking to.
    Pull the inner tube up about 7″ until the liquid fills the tube.
    Pump the inner tube down and siphon will begin.
    Pull out inner tube and sanitize Easy-Siphon for storage.

    Our standard 1/2″ racking cane tips will work with this product, see our You Might Also Need section below for product information.

    Quick View
  • Auto Siphon Carboy Clip &..

    Auto Siphon Carboy Clip &..

    $3.99

    Clamps to buckets, carboys and other containers. Holds the Auto Siphon securely above the sediment while transferring. To use, simply snap on the Auto Siphon, slide down to the desired level, and then snap off when done. Use the 1/2 inch Auto Siphon Clip for the large 1/2 inch Auto Siphon.

    Downloads:

    Helpful tips
    Instructional video

    Quick View
  • Auto Siphon Carboy Clip &..

    Auto Siphon Carboy Clip &..

    $3.99

    Clamps to buckets, carboys and other containers. Holds the Auto Siphon securely above the sediment while transferring. To use, simply snap on the Auto Siphon, slide down to the desired level, and then snap off when done. Use the 3/8 inch Auto Siphon Clip for Mini and Regular 3/8 inch Auto Siphons.

    Quick View
  • Racking Cane – Stai..

    Racking Cane – Stai..

    $11.99

    A stainless racking cane used to siphon beer or wine, usually after fermentation. Unlike plastic racking cane, this stainless version will not break, crack, or discolor. The right size for all around general use. The 26″ comes with a red tip that reduces trub pick up during siphoning.

    Quick View
  • Racking Tube – Acry..

    Racking Tube – Acry..

    $3.49

    Plastic racking cane – 1/2 inch OD x 30 inches long, with curved top. 1/2 inch diameter racking canes transfer liquids about twice as fast as 3/8 inch racnking canes, and are more commonly used for filling wine bottles and siphoning liquids quickly.

    Quick View
  • Racking Tube – Acry..

    Racking Tube – Acry..

    $1.99

    Plastic racking cane – 3/8 inch OD x 21 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
  • Racking Tube – Acry..

    Racking Tube – Acry..

    $2.49

    Plastic racking cane – 3/8 inch OD x 24 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
  • Racking Tube – Stai..

    Racking Tube – Stai..

    $9.99

    Stainless Steel racking cane – 3/8 inch OD x 24 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
  • Racking Tube – Stai..

    Racking Tube – Stai..

    $10.99

    Stainless Steel racking cane – 3/8 inch OD x 24 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
  • Racking Tube – Stai..

    Racking Tube – Stai..

    $10.99

    Stainless Steel racking cane – 3/8 inch OD x 30 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
  • Racking Tube – Stai..

    Racking Tube – Stai..

    $13.99

    Stainless Steel racking cane – 3/8 inch OD x 30 inches long, with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

    Quick View
X