Quick Disconnects for brewery Plumbing | Beer Brewing Quick Disconnects | Moonshiners.club

Quick Disconnects

Quick Disconnects make it easy to assemble, rearrange, and disassemble the hoses in your brewery. With stainless steel, open Polysulfone, and auto-shutoff polysulfone styles, we have every type of quick disconnect to fit your needs.

Showing 1–20 of 25 results

  • Female Stainless Steel Qu..

    Female Stainless Steel Qu..

    $12.99

    When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Female National Pipe Thread on the ends for easy connectivity to almost anything.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2″ ID. Gasket temperature range is -40? to 250? F. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.

    Designed & Manufactured by Fermentap.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • Female Stainless Steel Qu..

    Female Stainless Steel Qu..

    $12.99

    Made in the USA from 304 stainless steel.

    This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Barb on the ends for easy connectivity to any 1/2″ tubing you may have.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8″ ID. Gasket temperature range is -40? to 250? F. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • Male Stainless Steel Quic..

    Male Stainless Steel Quic..

    $9.99

    When used in conjunction with the female QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Female National Pipe Thread on the ends for easy connectivity to almost anything.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2″ ID. Gasket temperature range is -40? to 250? F. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.

    Designed & Manufactured by Fermentap.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • Male Stainless Steel Quic..

    Male Stainless Steel Quic..

    $10.99

    Made in the USA from 304 stainless steel.

    This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Barb on the ends for easy connectivity to any 1/2″ tubing you may have.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8″ ID. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • MPT Stainless Steel Femal..

    MPT Stainless Steel Femal..

    $12.99

    When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Male National Pipe Thread on the ends for easy connectivity to almost anything.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2″ ID. Gasket temperature range is -40? to 250? F. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • MPT Stainless Steel Male ..

    MPT Stainless Steel Male ..

    $9.99

    When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2″ Male National Pipe Thread on the ends for easy connectivity to almost anything.

    The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2″ ID. Gasket temperature range is -40? to 250? F. Open port, does not have shut-off.

    We designed the original stainless QD’s for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.

    Designed & Manufactured by Fermentap.

    Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

    Quick View
  • Replacement Gasket For St..

    Replacement Gasket For St..

    $0.99

    Replacement Gasket For Fermentap Stainless Steel QD’s.

    Temperature range is -40? to 250? F.

    Approximately 13/16 inch wide.

    Quick View
  • High Temp Plastic Female ..

    High Temp Plastic Female ..

    $11.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi. This piece is the female side that can be used with both the H501B and the H501F, this has 1/2″ barb to connect to any 1/2″ I.D. tubing. The springs are 316 stainless.

    Quick View
  • High Temp Plastic Female ..

    High Temp Plastic Female ..

    $13.99

    Identical to the rest of our line of H501 LT QDs, but equipped with a shutoff valve so that the QD seals when disconnected. Ideal for use with Glycol and Topping Systems or anywhere else you want to make sure that your lines won’t leak when taken apart. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi.

    Quick View
  • High Temp Plastic Female ..

    High Temp Plastic Female ..

    $11.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi. This piece is the female side that can be used with both the H501B and the H501F, this has 1/2″ Male NPT to connect to any 1/2″ Female NPT connections. The springs are 316 stainless.

    Quick View
  • High Temp Plastic Female ..

    High Temp Plastic Female ..

    $14.49

    Identical to the rest of our line of H501 CPC QDs, but equipped with a shutoff valve so that the QD seals when disconnected. Ideal for use with Glycol and Topping Systems or anywhere else you want to make sure that your lines won’t leak when taken apart. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi.

    Quick View
  • High Temp Plastic Male QD..

    High Temp Plastic Male QD..

    $9.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi. This piece is the male side that can be used with both the H501A and the H501E, this has 1/2″ barb to connect to any 1/2″ I.D. tubing. The o-ring is EPDM.

    Quick View
  • High Temp Plastic Male QD..

    High Temp Plastic Male QD..

    $12.99

    Identical to the rest of our line of H501 LT QDs, but equipped with a shutoff valve so that the QD seals when disconnected. Ideal for use with Glycol and Topping Systems or anywhere else you want to make sure that your lines won’t leak when taken apart. They are made of Polysulfone plastic, which is food grade up to 280F and can handle up to 125 psi.

    Quick View
  • High Temp Plastic Male QD..

    High Temp Plastic Male QD..

    $9.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi. This piece is the male side that can be used with both the H501A and the H501E, this has 1/2″ Male NPT to connect to any 1/2″ Female NPT connections. The o-ring is EPDM.

    Quick View
  • High Temp Plastic Male QD..

    High Temp Plastic Male QD..

    $14.99

    Identical to the rest of our line of H501 CPC QDs, but equipped with a shutoff valve so that the QD seals when disconnected. Ideal for use with Glycol and Topping Systems or anywhere else you want to make sure that your lines won’t leak when taken apart. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi.

    Quick View
  • High Temp Plastic QD Set ..

    High Temp Plastic QD Set ..

    $16.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle upto 125 psi. LinkTech Quick Disconnects are high-quality QDs that interconnect with CPC products with the same 3/8″ flow path. This is a set of male and female quick disconnects both with Male NPT.The o-ring is EPDM.

    Quick View
  • High Temp Plastic QD Set ..

    High Temp Plastic QD Set ..

    $16.99

    Great food grade quick disconnects. They are made of Polysulfone plastic, which is food grade up to 280F and can handle up to 125 psi. This set has 1/2″ Male NPT on the male connector and a 1/2″ Barb fitting on the Female connector. The o-ring used is EPDM and the springs are 316 stainless. Perfect QD set to use to set up one handed operation tubing from a 1/2″ FPT threaded fitting to another 1/2″ FPT threaded fitting. Two sets would be required for each line of tubing.

    Quick View
  • Kent Female QD – 1/..

    Kent Female QD – 1/..

    $3.49

    Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250?F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2″ MPT, 3/8″ Barbs, and 1/2″ Barbed, all with both female and male QD options!

    Customizing your brewery to ease the brew day doesn’t have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs!

    Features:

    Female Kent QD with 1/2″ barb on the other end.
    A single-handed connection and disconnection
    Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material
    Easy installation into your home brewery
    KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.
    An affordable version for homebrewers who want an introduction into the world of quick disconnects.
    3/8″ ID
    1/2″ OD

    Quick View
  • Kent Female QD – 1/..

    Kent Female QD – 1/..

    $3.49

    Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250?F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2″ MPT, 3/8″ Barbs, and 1/2″ Barbed, all with both female and male QD options!

    Customizing your brewery to ease the brew day doesn’t have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs!

    Features:

    Female Kent QD with 1/2″ MPT on the other end.
    A single-handed connection and disconnection
    Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material
    Easy installation into your home brewery
    KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.
    An affordable version for homebrewers who want an introduction into the world of quick disconnects.

    Quick View
  • Kent Female QD – 3/..

    Kent Female QD – 3/..

    $3.49

    Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250?F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2″ MPT, 3/8″ Barbs, and 1/2″ Barbed, all with both female and male QD options!

    Customizing your brewery to ease the brew day doesn’t have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs!

    A single-handed connection and disconnection
    Single barb system which eliminates the use of hose clamps in most applications
    Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material
    Easy installation into your home brewery
    KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.
    An affordable version for homebrewers who want an introduction into the world of quick disconnects.

    Quick View
X