Brewing Hardware & Plumbing for Beer Brewing | Moonshiners.club

Plumbing & Hardware

For many home brewers, building and tinkering with equipment is almost as fun as the brewing process itself. Our brass and stainless fittings can turn a seemingly normal steel kettle into a metal masterpiece, while the hoses and plastic polysulfone fittings and March Pumps will bring more power to your set-up.

Showing 1–20 of 179 results

  • Blichmann 1″ Tri-Cl..

    Blichmann 1″ Tri-Cl..

    $2.49

    Replacement 1″ TriClamp gasket for the Blichmann Fermenator. Used on the bottom TC clamp.

    Quick View
  • Blichmann 1/2″ Tri-..

    Blichmann 1/2″ Tri-..

    $2.49

    Replacement 1/2″ TriClamp gasket for the Blichmann Fermenator’s racking arm.

    Quick View
  • Blichmann Fermenator PRV ..

    Blichmann Fermenator PRV ..

    $1.49

    This is a Blichmann Spare Part. Replacement Fermenator pressure relief valve (PRV) o-ring.

    Quick View
  • Blichmann Tower of Power ..

    Blichmann Tower of Power ..

    $39.99

    This is a Blichmann Spare Part. Replacement ignition cable for the Blichmann Tower of Power. 72″ length.

    Quick View
  • Blichmann Tower of Power ..

    Blichmann Tower of Power ..

    $25.99

    This is a Blichmann Spare Part. Replacement ignition electrode for the Blichmann Tower of Power.

    Quick View
  • Blichmann Tower of Power ..

    Blichmann Tower of Power ..

    $25.99

    This is a Blichmann Spare Part. Replacement sensor cable for the Blichmann Tower of Power.

    Quick View
  • The Kettle Spider

    The Kettle Spider

    $25.99

    Help your customers make their brew day easier and their additions more efficient with a Kettle Spider. Just attach a reusable nylon mesh bag with drawstring and use the Kettle Spider to steep grains in an extract batch or to take the mess and burns out of multiple hop additions in the boil.

    With an ideal placement in the center of the kettle, the Kettle Spider aids in extraction of flavor, oils and alpha acids.

    The Kettle Spider makes bags easier to use with hops because it is open throughout the boil. Just keep adding the hops your recipe calls for. Also keeps bags off the bottom of the kettle, preventing a hole from developing in your bag.

    Made from 304 Stainless steel with adjustable anti-slip silicone sleeves, the Kettle Spider will fit most all kettles. Diameter of the hole: 3 3/4″. Length of Arms: 9″.

    Tip: A 4″ Tri-Clamp fitting or Keg Lid O-Ring can be also be used to hold bags in place.

    Please note that this item does not include a mesh bag.

    Quick View
  • Adhesive Liquid Crystal T..

    Adhesive Liquid Crystal T..

    $1.99

    Adhesive Liquid Crystal Thermometer that measures both Farenheit and Celsius

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $24.99

    Do you have a kettle or cooler but would like the ease and convenience of using a ball valve to easily drain liquid? Are you a Do It Yourself Type person? At a fraction of the cost of having a spigot welded into your kettle you can drill a whole and install a weldless ball valve.

    The problem with most weldless fittings is they are thrown together from assorted hardware. Common issues include leaking and lots of flex when you use the ball valve. These new weldless fittings feature are designed for brewing. There is no comparison to the weldless fittings of yesterday with their rock-solid feel and a solid leak free connection.

    This unit is also unique in that it feature 1/2″ female threads on the inside. This allows you to thread in various other fittings that you can see below. Want to later make a mashtun… no problem just thread in our stainless screen. want to fully drain your boil kettle? No problem, just add our kettle maximizer! This allows for unlimited flexibility.

    Weldless kit includes a 1/2″ Full Port ball valve and a 1/2″ barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included. This product replaces our WL101. Manufactured by Fermentap.

    You will need to drill a 1″ hole in your kettle for installation of this weldless spigot. We recommend a Step Drill Bit for this.

    For cooler installation instructions, please see “Installing A Weldless Spigot In Your Cooler” under the documents tab.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $24.99

    Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures! With the new Fermentap Weldless Thermometer, you can now upgrade any existing kettle or keg to read temperature from the outside!

    The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

    Features:

    Thermometer with 2″ Probe and 3″ Dial Face.
    2″ probe is short enough to stay out of the way of Immersion Chillers or heat exchangers.
    All Stainless Construction.
    High Temperature Food Grade Silicone Gasket.
    Will work great with Kettles & Kegs!
    Requires a 1″ hole to be drilled in the vessel for installation.
    Replaces our WL113.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $24.99

    Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures! With the new Fermentap Weldless Thermometer, you can now upgrade any existing kettle or keg to read temperature from the outside!

    The Fermentap Weldless Thermometer has a 6 inch probe, making it ideal for use in your mash tun. The 6 inch stem is positioned more towards the middle of the mash, giving the thermometer probe more exposure resulting in a more accurate reading. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

    Features:

    Thermometer with 6″ Probe and 3″ Dial Face.
    6″ probe is long enough to get an accurate reading in Mash.
    All Stainless Construction.
    High Temperature Food Grade Silicone Gasket.
    Will work great with Kettles & Kegs!
    Requires a 1″ hole to be drilled in the vessel for installation.
    Replaces our WL111.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $26.99

    Need clearer wort? Quicker chilling times? Perhaps higher hop utilization during flameout? Achieve all these desires and more, with the new Weldless Whirlpool Arm by Fermentap!

    Designed for installation underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. The advantages to a whirlpool are many. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. The whirlpool will result in a much higher chilling efficiency if using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions!

    The Fermentap Weldless Spigot is made of 100% stainless steel, ensuring it will be used in your brewing for years to come. It features a 1/2″ Full Port ball valve and a 1/2″ barb. The inner barbed elbow is 3/8″. The bulkhead is a specifically engineered piece of stainless, made for brewing! It features a 1/2″ MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connection of any brewing accessory you might want!

    You will need to drill a 1″ hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $54.99

    The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1″ hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade!

    Features:

    11″ Sight Gauge is perfect for up to 10 gallon kettles (dependent upon dimensions!).
    Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture.
    Stainless construction means the product will last for years.
    Sight Gauge disassembles easily for cleaning.
    1/2″ FPT on sight gauge base means you can upgrade with a thermometer!
    Replaces our WL116.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $56.99

    The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1″ hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade!

    Features:

    16″ Sight Gauge is perfect for up to 15 gallon kettles (dependent upon dimensions!).
    Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture.
    Stainless construction means the product will last for years.
    Sight Gauge disassembles easily for cleaning.
    1/2″ FPT on sight gauge base means you can upgrade with a thermometer!
    Replaces our WL121.

    Quick View
  • Stainless – Weldles..

    Stainless – Weldles..

    $64.99

    The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1″ hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade!

    Features:

    20″ Sight Gauge is perfect for up to 30 gallon kettles(dependent upon dimensions!).
    Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture.
    Stainless construction means the product will last for years.
    Sight Gauge disassembles easily for cleaning.
    1/2″ FPT on sight gauge base means you can upgrade with a thermometer!
    Replaces our WL126.

    Quick View
  • S/S Bulkhead 1/2″ F..

    S/S Bulkhead 1/2″ F..

    $12.99

    This is the Stainless Steal Bulkhead that we use on our series of weldless fittings. 1/2″ FPT x 1/2″ MPT along with a flat, thick rubber washer that makes it super easy to install on most kettles.

    Quick View
  • HI Temp O-ring for weldle..

    HI Temp O-ring for weldle..

    $1.19

    High temperature o-ring for our weldless valve kits that require only one o-ring. O-ring measures 3/4″ ID, and 1 1/4″ OD.

    Quick View
  • Replacement Stainless Was..

    Replacement Stainless Was..

    $1.19

    This is a replacement washer for our New Style Weldless Kits. All Stainless Steel.

    1.5″ OD x 1.0″ ID x 0.1″ Thick

    Quick View
  • Weldless Kit Replacement ..

    Weldless Kit Replacement ..

    $1.19

    This is a replacement Silicone Gasket for our Weldless Kits. It’s easy to lose, despite it’s vibrant red color, and sometimes a second gasket may be needed depending on the contour or material of the vessel being modified. 1.5″ OD and 1″ ID

    Quick View
X