Portable Keg Dispensing

Bring your homebrew anywhere with these easy and convenient portable keg dispensing options. Be the life of any party by serving your hand crafted beer out of any style of keg.

Showing 1–20 of 28 results

  • Mini CO2 Regulator Kit

    Mini CO2 Regulator Kit

    $79.99

    If you choked on the price check out KEG950 because essentially they do the same thing. However the mini-regulator is one the coolest products in our catalog under 1 lb as voted upon by our crew. Why so cool?

    The mini-reg features total portability with all the features of a full size regulator. Basically when you put lots of features in a very small package the price goes up and this is no exception. The regulator has a range of .5-1.5 bars which equates to 7-21 p.s.i.. This means that unlike KEG950 that shoots in CO2 at an un-calculable amount, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes its own disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is also a two stage mini-regulator, meaning that is takes the pressure down from 800psi to a lower pressure and then to your set pressure of around 10psi. Two stage regulators are the only way to have consistent pressure. There are now mini regulators from China that take the pressure from 800psi to 10psi but they will not maintain that pressure. One 74 gram cartridge will dispense one 5 gallon keg.

    Comes with regulator, one gas in quick disconnect and the associated hardware. 74 gram CO2 cartridges, KEG962 are available separately. Your brew buddies definitely don’t have this!

    Quick View
  • mini CO2 Regulator Only &..

    mini CO2 Regulator Only &..

    $44.99

    A very portable mini CO2 regulator.

    Range of .5-1.5 bars or 7-21 psi
    Uses 74 gram CO2 cartridges
    Two stage
    Consistent pressure
    Regulator only

    Quick View
  • Pin Lock Mini CO2 Regulat..

    Pin Lock Mini CO2 Regulat..

    $79.99

    Mini Regulator assembly for Pin Lock kegs. Comes with regulator, one gas in Pin Lock quick disconnect and the associated hardware. 74 gram CO2 cartridges are also available.

    Quick View
  • Party Pump Kit

    Party Pump Kit

    $29.99

    Dispense a keg on the go with the party pump kit

    Quick View
  • Bronco Pump – Sanke..

    Bronco Pump – Sanke..

    $49.99

    Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.

    Quick View
  • Pony Pump – Plastic..

    Pony Pump – Plastic..

    $39.99

    The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight (12 oz.), has a no-spritz seal, stationary probe and a pressure relief vent, 2′ length hose and a plastic faucet. It is inexpensive, great for parties and limited use operations. Packaged in corrugated box with instructions.

    Quick View
  • Shorty Hand Pump Beer Tap..

    Shorty Hand Pump Beer Tap..

    $49.99

    Perfect for summertime parties, the low-profile design makes this pump easy to use, store, and transport. At the beach, the park, or in the backyard, the Shorty will provide you with great beer keg after keg. For D style kegs.

    Also known as a keg coupler, coupling, or adapter.

    Quick View
  • Bottle Opener Cap Catcher..

    Bottle Opener Cap Catcher..

    $18.99

    Aluminum cap catcher for use with our Wall mounted bottle openers.

    To use, screw the 2 screws (included) about 4 inches below the bottle opener. Hang the cap catcher on the screws, and you are ready to drink! TIP: Do not secure the screws too tightly, it is helpful to be able to slide the cap catcher up and off the screws to dispose of the collected caps.

    Quick View
  • Wall Mount Bottle Opener ..

    Wall Mount Bottle Opener ..

    $12.99

    Wall mounted bottle opener for beer, soda, and other crown capped beverages. Attaches to your wall or refrigerator with 2 screws (included).

    Features “Home Brewed” printed on the front face of the opener.

    Add a cap catcher a few inches below the opener for a complete package!

    Quick View
  • Wall Mount Bottle Opener ..

    Wall Mount Bottle Opener ..

    $12.99

    Wall mounted bottle opener for beer, soda, and other crown capped beverages. Attaches to your wall or refrigerator with 2 screws (included).

    Features “USA” and an American flag printed on the front face of the opener.

    Add a cap catcher a few inches below the opener for a complete package!

    Quick View
  • 16g Threaded CO2 Cartridg..

    16g Threaded CO2 Cartridg..

    $11.99

    16g threaded CO2 cartridges that work great with our KEG966 mini CO2 regulator. Comes in a package of 6 cartridges.

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • 16g Unthreaded CO2 Cartri..

    16g Unthreaded CO2 Cartri..

    $9.99

    These are currently unthreaded cartridges. These can be used with our KEG950, KEG952, and KEG953, as well as the 128 oz Growlerwerks uKeg. Used with some mini keg systems. Case of 6

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • 8g CO2 Cartridges –..

    8g CO2 Cartridges –..

    $9.99

    Standard 8g CO2 cartridge replacement. Package contains 10 cartridges. Works with the GrowlerWerks pressurizeable uKeg Growler.

    Cartridge is 2 1/2″ long and 11/16″ in diameter

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • CO2 Cartridge (74g)

    CO2 Cartridge (74g)

    $19.99

    Used with the KEG960 unit. One canister will push between 1-4 five gallon Cornelius style homebrew kegs, depending on how it is used and the CO2 consumption required. Made by Leland.

    This product is only eligible for ground shipment within the contiguous United States.

    5/8-18 threading

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • Nitrogen Cartridge (18g)

    Nitrogen Cartridge (18g)

    $27.99

    18 gram disposable Nitrogen cartridges for use with our mini CO2 regulators, KEG960, KEG965A. Often used to push wine, mixed drinks, coffee, or any other liquid where you do not want carbonation. Nitrogen, unlike CO2, will not dissolve into solution. Kegged drinks can be mixed up and will stay fresh for long periods of time. 5/8″ threaded neck.

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • CO2 Injector for Pin Lock..

    CO2 Injector for Pin Lock..

    $34.99

    CO2 injector assembly for Pin Lock Kegs. Uses non-theaded 16g co2 cartridges.

    Quick View
  • CO2 Injector W/1 Co2 Cart..

    CO2 Injector W/1 Co2 Cart..

    $29.99

    CO2 Injector has 1/4″ female flare thread opening. Uses 16g Cartridges.

    Does not come with quick disconnect.

    Caution the cartridges contain liquid co2 that will dispense at over 600PSI. With that in mind, we suggest having the faucet open before pushing more co2 into a keg. Also, do not push the inject lever when not hooked up to a keg as you will put over 600PSI into a quick disconnect and will blow the top threads off.

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • Draft Cleaning Kit

    Draft Cleaning Kit

    $49.99

    Clean out those dirty draft beer lines! Beer flavor gets funky when your tap, line and faucet are filled with gunk. We recommned that you ideally clean your lines after every keg. Our kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through the whole system. Faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well. A must have for cleaning draft systems because life is too short to drink bad beer.

    Quick View
  • 1/4 in Barbed Nipple for ..

    1/4 in Barbed Nipple for ..

    $2.99

    For use with 3/16 or 1/4 I.D. vinyl hose from the cold plate to the faucet shank assembly. 3/16 in Barb x 1/2 in 16 Thread

    Quick View
  • Beer Shank – Metal ..

    Beer Shank – Metal ..

    $25.99

    Beer shanks with coupling nut to attach faucet to one end, and beer thread (29/32 in 14 thread) nut and fittings to the other end. Chrome plated brass, 1/4 in bore. Typically used for mounting faucets through walls, refrigerators, cooler for jockey boxes, or other custom applications.

    Quick View
X