Disconnects

Liquid and gas line disconnects for corney style soda kegs.

Showing 1–20 of 21 results

  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $9.99

    Plastic quick disconnects for ball lock Cornelius-type kegs.

    Grey quick disconnects are used for the gas in tank plug.

    Barbed fittings are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $3.99

    White, gas in quick disconnect with barb for gas line.

    Barb is 1/4″. 1/4″ or 5/16″ beverage tubing is recommended for gas line.

    Tip N’ Trick: Sometimes ball lock fittings are a challenge to quick disconnect “on and off” a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We’ve coined this term “Lube and Turn”.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $6.99

    Plastic quick disconnects for ball lock Cornelious-type kegs.

    Grey quick disconnects are used for the gas in tank plug.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $9.99

    Plastic quick disconnects for ball lock Cornelious-type kegs.

    Black quick disconnects are used for the liquid out tank plug.

    Barbed fittings are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $6.99

    Plastic quick disconnects for ball lock Cornelius-type kegs.

    Black quick disconnects are used for the liquid out tank plug.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $3.99

    Black, beverage out quick disconnect with barb for beverage line.

    Barb is 1/4″. 3/16″ beverage tubing is recommended.

    Tip N’ Trick: Sometimes ball lock fittings are a challenge to quick disconnect “on and off” a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We’ve coined this term “Lube and Turn”.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $4.99

    Black, beverage out quick disconnect with male flare fitting made for Cornelius type kegs.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • Ball Lock Quick Disconnec..

    Ball Lock Quick Disconnec..

    $3.99

    White, gas in quick disconnect with male flare fitting made for Cornelius type kegs.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • CM Becker Ball Lock Quick..

    CM Becker Ball Lock Quick..

    $6.99

    This is a high quality plastic quick disconnect made by CM Becker for your beverage line.

    Barb is 1/4″. 3/16″ beverage tubing is recommended.

    Tip N’ Trick: Sometimes ball lock fittings are a challenge to quick disconnect “on and off” a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We’ve coined this term “Lube and Turn”.

    Quick View
  • CM Becker Ball Lock Quick..

    CM Becker Ball Lock Quick..

    $6.99

    This is a high quality plastic quick disconnect made by CM Becker for your gas line.

    Barb is 1/4″. 1/4″ or 5/16″ beverage tubing is recommended for gas line.

    Tip N’ Trick: Sometimes ball lock fittings are a challenge to quick disconnect “on and off” a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We’ve coined this term “Lube and Turn”.

    Quick View
  • CM Becker Pin Lock Quick ..

    CM Becker Pin Lock Quick ..

    $6.99

    Plastic quick disconnects for pin lock Cornelius-type kegs.

    This is a high quality fitting made by CM Becker in Germany.

    Red and grey quick disconnects are used for the gas in tank plug.

    Barbed fittings are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.

    Quick View
  • CM Becker Pin Lock Quick ..

    CM Becker Pin Lock Quick ..

    $6.99

    Plastic quick disconnects for pin lock Cornelius-type kegs.

    This is a high quality fitting made by CM Becker in Germany.

    Red and grey quick disconnects are used for the gas in tank plug.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • CM Becker Pin Lock Quick ..

    CM Becker Pin Lock Quick ..

    $6.99

    Plastic quick disconnects for pin lock Cornelius-type kegs.

    This is a high quality fitting made by CM Becker in Germany.

    Red and black quick disconnects are used for the liquid out tank plug.

    Barbed fittings are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.

    Quick View
  • CM Becker Pin Lock Quick ..

    CM Becker Pin Lock Quick ..

    $6.99

    Plastic quick disconnects for pin lock Cornelius-type kegs.

    This is a high quality fitting made by CM Becker in Germany.

    Red and black quick disconnects are used for the liquid out tank plug.

    1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    Quick View
  • Torpedo Ball Lock Quick D..

    Torpedo Ball Lock Quick D..

    $17.99

    Torpedo keg beverage out ball lock quick disconnect. Barbed and stainless steel.

    Quick View
  • Torpedo Ball Lock Quick D..

    Torpedo Ball Lock Quick D..

    $17.99

    Torpedo keg beverage out ball lock quick disconnect fitting. Flared and stainless steel.

    Quick View
  • Torpedo Ball Lock Quick D..

    Torpedo Ball Lock Quick D..

    $17.99

    Torpedo keg gas in ball lock quick disconnect. Barbed and stainless steel.

    Quick View
  • Torpedo Ball Lock Quick D..

    Torpedo Ball Lock Quick D..

    $17.99

    Torpedo keg gas in ball lock quick disconnect. Flared and stainless steel.

    Quick View
  • Sanke Converter – T..

    Sanke Converter – T..

    $6.99

    Replace barbed tailpieces with 1/4 in male flare (MFL) tailpiece to attach any 1/4 in FFL fittings. Especially useful for setups where you want to change between commercial beer coupler and homebrew. Simply replace the barbed fitting on a Sanke coupler, then you can switch beer and gas fittings from MFL quick disconnects to the MFL coupler fittings. Use nylon flare washer (KEG040) between MFL fitting and the swivel nut.

    Quick View
X