Keg Gas Supplies

Sick of having to constantly swap your CO2 line from keg to keg? Take your kegging system to the next level by adding additional regulators or extra CO2 lines to serve multiple kegs at once, or to serve one keg while carbonating another. Our full selection of regulators, CO2 cylinders, and gas line splitters will enable you to add as many supply lines as you would like. We also offer replacement and repair parts for your regulator if it happens to have suffered a misfortune. You can even try your hand at dispensing your favorite brew with a nitrogen system to create that appealing cascading, creamy and luxuriously heady pour.

Showing 1–20 of 58 results

  • WilliamsWarn SodaStream R..

    WilliamsWarn SodaStream R..

    $26.99

    This adapter allows you to attach a CO2 regulator to a SodaStream CO2 cylinder.

    The NEW and IMPROVED WilliamsWarn soda stream adapter has a fundamental design improvement to eradicate lost gas through the connector: a side adjustment for the pin valve into the soda stream bottle enables the pin valve to be engaged once the cylinder, adaptor and regulator have been screwed together. This ensures that the gas supply from bottle to the regulator can be engaged and disengaged whilst fully connected.

    Prior third-party versions of this Adaptor – which have been in our industry for the past 15 years – did not allow adjustment whilst connected which would often lead to C02 gas being leaked.

    Quick View
  • 10lb CO2 Tank Aluminum

    10lb CO2 Tank Aluminum

    $99.99

    Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upgright position. Will dispense approximately 18 five gallon homebrew kegs before needing to be refilled. Dimensions: 20.75″ Tall x 7″ wide.

    Quick View
  • 2.5lb CO2 Tank – Al..

    2.5lb CO2 Tank – Al..

    $49.99

    Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upgright position. Will dispense approximately 4 five gallon homebrew kegs before needing to be refilled. Dimensions: 14.75″ Tall x 4.25″ wide.

    Quick View
  • 20lb CO2 Tank Aluminum

    20lb CO2 Tank Aluminum

    $132.99

    Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upgright position. Dimensions: 27.25″ Tall x 8″ wide.

    Quick View
  • 5lb CO2 Tank Aluminum

    5lb CO2 Tank Aluminum

    $79.99

    Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upgright position. Will dispense approximately 9 five gallon homebrew kegs before needing to be refilled. Dimensions: 18″ Tall x 5.25″ wide.

    Quick View
  • Nitrogen Tank – 5lb..

    Nitrogen Tank – 5lb..

    $109.99

    These nitrogen tanks (also capable of holding argon) are all brand new aluminum tanks in standard sizing with high quality valves. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. This tank is rated for 2216 PSI (for Nitrogen) which is higher than most similar CO2 tanks that are rated for 1800 PSI.

    Because you are purchasing a new nitrogen and argon tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.

    Fill with Nitrogen, Argon or beer gas mix (70% Nitrogen/30% CO2) for dispensing beers “On Nitrogen.”

    Quick View
  • CO2 Regulator – Dua..

    CO2 Regulator – Dua..

    $119.99

    Now you can have two different CO2 pressures coming from one tank.

    It has three main uses:

    Serve different beers at different pressures
    Serve and carbonate at different pressures
    Serve soda or sparkling water on one tap and beer on the other

    Made by Taprite in the USA, the leading regulator manufacturer, so you can be assured that the quality is good.

    Barbs are 5/16″.

    Boxed individually in cardboard boxes.

    Quick View
  • CO2 Regulator Fermentap &..

    CO2 Regulator Fermentap &..

    $39.99

    A great deal on a high quality dual gauge CO2 regulator. Check out these features:

    1) Hand adjustable pressure – no wishing you had a screwdriver in your pocket to change pressures.

    2) 30 PSI low pressure gauge – A more precise range for dispensing beer at home (as opposed to the standard 60 psi gauge)

    3) Built in tank gasket – so you are not stuck making a tank change without a gasket.

    4) Built in pressure relief valve – that is set to blow off at 60 psi for safety. Also features a pull ring so you can release excess pressure at any time, a very handy feature.

    5) On/Off valve with barb- easily connect line and turn off supply of CO2 for working with keg connections etc.

    6) Chrome plated brass – so will not rust.

    7) Large CO2 diaphragm – for increased performance and reliability.

    C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.

    Quick View
  • Dual Gauge Regulator by T..

    Dual Gauge Regulator by T..

    $64.99

    This dual gauge CO2 regulator is a high performance Taprite regulator with 0-50 PSI range, 60lb & 2000lb gauges, tank fitting, high performance 1/4″ MFL with shutoff and check valve, and a red easy adjustment cap. Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap! Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing.

    Quick View
  • MKII Dual Gauge CO2 Regul..

    MKII Dual Gauge CO2 Regul..

    $37.95

    The Keg King MKII is a high quality regulator at a great price. Features a large body with precision diaphragm for large flow rates when needed. Does not experience creep like many generic, cheaper chinese regulators.

    The MKIII has a second sintered filter on the underside of the seat cap assembly to help prevent the contamination that can cause a regulator to not work properly. Also the seat cap assembly is fully enclosed to reduce the chance of contamination if the regulator is opened for serviced

    The seat and seat cap assembly are made of ultra-high molecular weight polyethylene (UHMWPE) gasket. UHMWPE is much better than the normal Teflon gaskets.

    Features:

    0 – 50 PSI
    1/4 in. Barb
    Improved seat and seat cap design
    UHMWPE gasket provides a better seal
    Fully encapsulated seat assembly helps prevent contamination

    Quick View
  • Nitrogen/Argon Regulator ..

    Nitrogen/Argon Regulator ..

    $67.99

    A high quality dual guage Nitrogen and Argon regulator for beer or winemaking. This can be used to dispense Argon, Nitrogen, or BeerGas mixes (used for Guinness, and some other draft beers). CGA 580 Regulator, Made in the USA by Taprite.

    Boxed individually in cardboard boxes. Master pack quantity is 8 per case.

    Quick View
  • 1 Way Secondary Regulator..

    1 Way Secondary Regulator..

    $59.99

    Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary input. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

    Quick View
  • 2 Way Secondary Regulator..

    2 Way Secondary Regulator..

    $99.99

    Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary input. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting.This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

    Quick View
  • 3 Way Secondary Regulator..

    3 Way Secondary Regulator..

    $134.99

    Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary input. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. Barb fittings are 5/16thh ID. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

    Quick View
  • 4 Way Secondary Regulator..

    4 Way Secondary Regulator..

    $189.99

    Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

    Quick View
  • CO2 Gas Manifold – ..

    CO2 Gas Manifold – ..

    $19.99$49.99

    CO2 Distributors are an economical way to run more than one keg off of a single CO2 tank. Each shutoff has its own ball check valve to prevent the flow of liquid into the regulator. This gas distributor is made out of aluminum and offers a one piece construction for easy mounting.

    Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

    Features:

    1/4 in ball valves
    Rated up to 100 psi
    Screw holes for easy mounting
    Optional additional port on the end

    Quick View
  • Mini CO2 Regulator Kit

    Mini CO2 Regulator Kit

    $79.99

    If you choked on the price check out KEG950 because essentially they do the same thing. However the mini-regulator is one the coolest products in our catalog under 1 lb as voted upon by our crew. Why so cool?

    The mini-reg features total portability with all the features of a full size regulator. Basically when you put lots of features in a very small package the price goes up and this is no exception. The regulator has a range of .5-1.5 bars which equates to 7-21 p.s.i.. This means that unlike KEG950 that shoots in CO2 at an un-calculable amount, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes its own disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is also a two stage mini-regulator, meaning that is takes the pressure down from 800psi to a lower pressure and then to your set pressure of around 10psi. Two stage regulators are the only way to have consistent pressure. There are now mini regulators from China that take the pressure from 800psi to 10psi but they will not maintain that pressure. One 74 gram cartridge will dispense one 5 gallon keg.

    Comes with regulator, one gas in quick disconnect and the associated hardware. 74 gram CO2 cartridges, KEG962 are available separately. Your brew buddies definitely don’t have this!

    Quick View
  • mini CO2 Regulator Only &..

    mini CO2 Regulator Only &..

    $44.99

    A very portable mini CO2 regulator.

    Range of .5-1.5 bars or 7-21 psi
    Uses 74 gram CO2 cartridges
    Two stage
    Consistent pressure
    Regulator only

    Quick View
  • Pin Lock Mini CO2 Regulat..

    Pin Lock Mini CO2 Regulat..

    $79.99

    Mini Regulator assembly for Pin Lock kegs. Comes with regulator, one gas in Pin Lock quick disconnect and the associated hardware. 74 gram CO2 cartridges are also available.

    Quick View
X