Shanks

Choose from a variety of shanks to mount your beer faucets. Different lengths are available to fit any fridge, kegerator, or keezer build.

Showing 1–20 of 26 results

  • 1/4″ Tailpiece Elbo..

    1/4″ Tailpiece Elbo..

    $4.99

    1/4″ Tailpiece Elbow that is used with a 5/8 in. hex nut

    Quick View
  • Beer Faucet Shank –..

    Beer Faucet Shank –..

    $12.99

    Comes with a welded 3/16″ nipple, back nut, and plastic collar. It requires a 1″ hole for installation. When set in place, the shank will only have about 1 7/8″ of length to pass through your wall or fridge door, due to the length of the collar and back nut.

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Dimensions:

    3.125″ Total Length
    2.5″ Length Without Nipple

    Quick View
  • Beer Faucet Shank –..

    Beer Faucet Shank –..

    $15.99

    Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16″ nipple. Requires a 1″ hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 2.5″.

    Installation note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Dimensions:

    4.25″ Total Length
    3.75″ Length Without Nipple

    Quick View
  • Beer Faucet Shank –..

    Beer Faucet Shank –..

    $23.99

    Stainless Steel Faucet Shank

    Dimensions:

    6.5 in. Total Length
    5 in. Length Without Nipple
    3/16 in. Nipple
    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
  • Beer Faucet Wrench

    Beer Faucet Wrench

    $3.99

    For installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a draft tool like this.

    Quick View
  • Beer Shank Nipple –..

    Beer Shank Nipple –..

    $2.99

    1/4 inch barbed nipple for beer shanks, keg couplers, etc. 1/4 inch barbs are typically used with homebrew systems running 3/16 and 1/4 inch inside diameter (ID) tubing.

    You may also need a beer shank nut with this item.

    Quick View
  • Beer Shank Nipple –..

    Beer Shank Nipple –..

    $2.99

    5/16 inch barbed nipple for beer shanks, keg couplers, etc. 5/16 inch barbs are typically used with commercial systems running 5/16 inch inside diameter (ID) tubing.

    You may also need a beer shank nut with this item.

    Quick View
  • Beer Shank Nipple –..

    Beer Shank Nipple –..

    $8.99

    Beer shank 90 degree elbow tailpiece with 3/16 in barb. Use where clearance is tight to attach beer lines to beer shanks. Requires coupling nut (KEG345) and washer (KEG340).

    Quick View
  • Beer Shank Nut – Ch..

    Beer Shank Nut – Ch..

    $2.99

    Chrome plated brass nut, these are used on the back of beer shanks, on keg couplers, and multiple other draft serving functions.

    Features a standard beer thread, 29/32 inch, 14 thread.

    You will also need a beer shank nipple, either barbed or threaded.

    Quick View
  • Black Plastic Shank Colla..

    Black Plastic Shank Colla..

    $2.99

    Standard equipment on the 3,4 & 6″ shanks we sell.

    Quick View
  • Faucet Shank – 5.5&..

    Faucet Shank – 5.5&..

    $19.99

    Comes with a back nut, plastic collar, and a welded 3/16″ nipple. Requires a 1″ hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3/8″.

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
  • Faucet Shank – 6..

    Faucet Shank – 6..

    $19.99

    Comes with a back nut, plastic collar, and a welded 1/4″ nipple. Requires a 1″ hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3/8″.

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
  • Faucet, Knob And Shank Co..

    Faucet, Knob And Shank Co..

    $36.99

    This kit includes the 4″ shank with 3/16″ nipple, chrome faucet with stainless lever, and plastic 2.5″ knob.

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
  • Flow Control Shank Adapte..

    Flow Control Shank Adapte..

    $17.99

    This adapter goes in between your tap and shank and turns any faucet into a flow control faucet.

    Quick View
  • Intertap Draft Tool

    Intertap Draft Tool

    $3.99

    This Multi Draft Tool is designed to work with Keg King brand beer shanks and kegerators. It may not work with all brands of shanks and draft systems.

    Attach a shank to a tower
    Attach a faucet to shank
    Attach a regulator to a tank
    Bottle opener

    Quick View
  • Intertap Stainless Steel ..

    Intertap Stainless Steel ..

    $29.99

    Comes with a back nut, plastic collar, hex nut, and a 1/4″ barb. Requires a 1″ hole saw for installation. When set in place, the shank will only have about 2 1/8″ of length to pass through your wall or fridge door, due to the length of the collar and back nut.

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Dimensions:

    5 1/8″ Total Length
    4″ Length Without Barb
    2 1/8″ Length Between Collar and Back Nut
    Type 304 stainless steel construction.

    Quick View
  • Rubber Washer – Joc..

    Rubber Washer – Joc..

    $2.99

    Large rubber washer for use on beer shanks and jockey box shanks.

    Quick View
  • Stainless Beer Faucet Sha..

    Stainless Beer Faucet Sha..

    $19.99

    Stainless Steel Faucet Shank

    Dimensions:

    3.25″ Total Length
    2″ Length Without Nipple

    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
  • Stainless Beer Faucet Sha..

    Stainless Beer Faucet Sha..

    $22.99

    Stainless Steel Faucet Shank

    Dimensions:

    4.25 in. Total Length
    3 in. Length Without Nipple
    3/16 in. Nipple
    Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

    Quick View
X