Filter Pads & Cartridges

You can buy filter pads and cartridges for all the filters we sell.

Showing 1–20 of 26 results

  • The Clarifier – Sta..

    The Clarifier – Sta..

    $26.99$39.99

    The Clarifier is a reusable multiple stage stainless steel filter cartridge for filtering beer and wine. It is available in 1, 2 and 5 micron versions. It fits all commonly available standard 10” filter cartridge housings.

    The Clarifier utilizes a multiple layered 2 stage design. The outer layer traps hops and large particles while the inner layer filters yeast cells, proteins, and other small particles in your beer down to the filter rating. It’s made from passivated micronic stainless steel mesh and food grade silicone gaskets.

    All brewers want to sanitize everything that comes in contact with their beer on the cold side, with The Clarifier now you can sanitize your beer filter prior to use too. It’s easy to clean after filtering and will provide a long useful life – paying for itself compared to disposable filters after as few as 3 uses.

    Filtering is effective and significantly reduces the time it takes for your beer to condition. The image below shows how much yeast and trub was removed from a 5 gallon batch of a 7% IPA using a 5 micron Clarifier. This beer had an unusually high yeast load and was dry hopped with 62 grams of pelletized hops 3 days before filtering.

    Quick View
  • Carbon Block Water Filter..

    Carbon Block Water Filter..

    $8.99

    Remove chlorine and organic flavor with this 10″ carbon block filter. Also filters out sediment to 10 micron. We open the housing after use and store filter dry to eliminate algae from growing inside the housing. Designed to work with our filter housing or any other standard, 10″ housing. Good for 8,000 gallons.

    After talking to different manufacturers it is our understanding that chloramines can be removed by carbon filtration if the water has a long contact time with the carbon. It is recommended to use at a fill rate of less than 1 gallon per minute in order to remove chloramines.

    NOTE: This product should not be used in hot water applications. Cold water only!
    This product is designed to filter water only.

    Quick View
  • 1 Micron BevBright™ Bev..

    1 Micron BevBright™ Bev..

    $3.99$7.99

    Clear beer & wine wins awards and impresses those we share it with. BevBright™Cartridge Filters are an inexpensive, easy to use, and effective filtration media that your customers are sure to love!

    BevBright™is the first high-efficiency, multi-zoned, disposable cartridge filter available in the Homebrewing & Winemaking market. Current spun cartridge filters have 60-80% efficiency ratings, meaning they let a lot of the material at their given micron rating pass right through the filter. BevBright’s™least efficient filter boasts a 90% rating, and they only get better from there!

    The multi-zoned construction weaves coarser fibers on the outside of the cartridge and finer fibers on the inside. This approach allows the surface of the filter to catch a lot of the larger sediment and the interior to perform the “actual filtration.” The net effect? It takes a lot longer for these filters to clog up and virtually eliminates the risk of blow-by.

    And perhaps the best feature of all: These filters are so affordable that we recommend just tossing them in the trash when you’re done! Save your customers the time, frustration and risk of trying to clean and sanitize the filter cartridge. Note that these are True 10″ Filter Cartridges that rely upon the housing being closed tightly in order to engage the Knife Seals & eliminate bypass.

    1 Micron Filters
    Your customers should use a 1 micron filter as a final, ultra-clear polish only when their product is already very well settled. Excessive yeast or sediments in solution will quickly clog up a 1 micron cartridge. Product that is cloudy in appearance from anything other than a protein haze should be run through a 3 or even 5 micron prior to 1 micron filtering. In many cases the single coarser filtration will be all they need.

    Which Efficiency is best?
    Every batch & brewer is different. Some customers will find that their processes or ingredient choices naturally yield clearer or cloudier product. We recommend starting at our mid-range Super High Efficiency and adjusting from there as necessary.

    90% High Efficiency – Removes 90% of the material 1 micron or larger in a single pass.
    98% Super High Efficiency – Removes 98% of the material 1 micron or larger in a single pass.
    99.8% Absolute Efficiency – Removes 99.8% of the material 1 micron or larger in a single pass.

    Quick View
  • 3 Micron BevBright™ Be..

    3 Micron BevBright™ Be..

    $3.49$7.99

    Clear beer & wine wins awards and impresses those we share it with. BevBright™Cartridge Filters are an inexpensive, easy to use, and effective filtration media that your customers are sure to love!

    BevBright™is the first high-efficiency, multi-zoned, disposable cartridge filter available in the Homebrewing & Winemaking market. Current spun cartridge filters have 60-80% efficiency ratings, meaning they let a lot of the material at their given micron rating pass right through the filter. BevBright’s™least efficient filter boasts a 90% rating, and they only get better from there!

    The multi-zoned construction weaves coarser fibers on the outside of the cartridge and finer fibers on the inside. This approach allows the surface of the filter to catch a lot of the larger sediment and the interior to perform the “actual filtration.” The net effect? It takes a lot longer for these filters to clog up and virtually eliminates the risk of blow-by.

    And perhaps the best feature of all: These filters are so affordable that we recommend just tossing them in the trash when you’re done! Save your customers the time, frustration and risk of trying to clean and sanitize the filter cartridge. Note that these are True 10″ Filter Cartridges that rely upon the housing being closed tightly in order to engage the Knife Seals & eliminate bypass.

    3 Micron Filters
    The 3 micron cartridge is our most popular and most recommended filter. It offers a great balance between the high capacity of the 5 micron and the ulta-clear polish of the 1 micron. Our dual zone construction helps the 3 micron cartridge remove larger sediments without clogging prematurely and still effectively remove yeast and fine particulates from solution.

    Which Efficiency is best?
    Every batch & brewer is different. Some customers will find that their processes or ingredient choices naturally yield clearer or cloudier product. We recommend starting at our mid-range Super High Efficiency and adjusting from there as necessary.

    90% High Efficiency – Removes 90% of the material 1 micron or larger in a single pass.
    98% Super High Efficiency – Removes 98% of the material 1 micron or larger in a single pass.
    99.8% Absolute Efficiency – Removes 99.8% of the material 1 micron or larger in a single pass.

    Quick View
  • 5 Micron BevBright™ Be..

    5 Micron BevBright™ Be..

    $3.99$7.99

    Clear beer & wine wins awards and impresses those we share it with. BevBright™Cartridge Filters are an inexpensive, easy to use, and effective filtration media that your customers are sure to love!

    BevBright™is the first high-efficiency, multi-zoned, disposable cartridge filter available in the Homebrewing & Winemaking market. Current spun cartridge filters have 60-80% efficiency ratings, meaning they let a lot of the material at their given micron rating pass right through the filter. BevBright’s™least efficient filter boasts a 90% rating, and they only get better from there!

    The multi-zoned construction weaves coarser fibers on the outside of the cartridge and finer fibers on the inside. This approach allows the surface of the filter to catch a lot of the larger sediment and the interior to perform the “actual filtration.” The net effect? It takes a lot longer for these filters to clog up and virtually eliminates the risk of blow-by.

    And perhaps the best feature of all: These filters are so affordable that we recommend just tossing them in the trash when you’re done! Save your customers the time, frustration and risk of trying to clean and sanitize the filter cartridge. Note that these are True 10″ Filter Cartridges that rely upon the housing being closed tightly in order to engage the Knife Seals & eliminate bypass.

    5 Micron Filters
    Your customers should use our 5 micron filter when they have visible particulates in their beer or wine, or are going to be drawing out of a vessel with a lot of sediment in the bottom. The 5 micron cartridge will remove almost all of the visible imperfections and the majority of any yeast left in suspension, all while being the least likely to clog up mid-filtration. For well settled starting products that just need a final clean-up, we recommend a 3 or 1 micron filtration instead.

    Which Efficiency is best?
    Every batch & brewer is different. Some customers will find that their processes or ingredient choices naturally yield clearer or cloudier product. We recommend starting at our mid-range Super High Efficiency and adjusting from there as necessary.

    90% High Efficiency – Removes 90% of the material 1 micron or larger in a single pass.
    98% Super High Efficiency – Removes 98% of the material 1 micron or larger in a single pass.
    99.8% Absolute Efficiency – Removes 99.8% of the material 1 micron or larger in a single pass.

    Quick View
  • 8.0 Micron Super Jet Filt..

    8.0 Micron Super Jet Filt..

    $4.99$169.99

    Genuine Buon Vino Super Jet Filter Pads. #1 8.0 micron nominal filter pads are used for coarse filtration. They remove large particles in heavy wines, typically big reds. Wine should typically be filtered through #1 pads first, then subsequent runs can use smaller pads if desired.

    Quick View
  • 2.0 Micron Super Jet Filt..

    2.0 Micron Super Jet Filt..

    $4.99$169.99

    Genuine Buon Vino Super Jet Filter Pads. #2 2.0 micron nominal filter pads are used for fine or polishing filtration. Use to remove medium to small particulate and add shine to your wine. Grape wines should typically be filtered with #1 pads before using #2 pads, although kit wines with less sediment can use the #2 pads first.

    Quick View
  • 0.5 Micron Super Jet Filt..

    0.5 Micron Super Jet Filt..

    $5.49$209.99

    Genuine Buon Vino Super Jet Filter Pads. #3 0.5 micron nominal filter pads are used for sterile filtration. They are very tight pads that remove very small particulate in your wine, including most yeast and bacteria. We strongly recommend that you filter with the #2 pad first before filtering with the # 3 pads.

    Quick View
  • 8.0 micron Mini Jet Filte..

    8.0 micron Mini Jet Filte..

    $3.49

    Genuine Buon Vino Super Jet Filter Pads. #1 8.0 micron nominal filter pads are used for coarse filtration. They remove large particles in heavy wines, typically big reds. Wine should typically be filtered through #1 pads first, then subsequent runs can use smaller pads if desired.

    Quick View
  • 2.0 micron Mini Jet Filte..

    2.0 micron Mini Jet Filte..

    $3.49

    Genuine Buon Vino Super Jet Filter Pads. #2 2.0 micron nominal filter pads are used for fine or polishing filtration. Use to remove medium to small particulate and add shine to your wine. Grape wines should typically be filtered with #1 pads before using #2 pads, although kit wines with less sediment can use the #2 pads first.

    Quick View
  • 0.5 micron Mini Jet Filte..

    0.5 micron Mini Jet Filte..

    $3.49

    Genuine Buon Vino Super Jet Filter Pads. #3 0.5 micron nominal filter pads are used for sterile filtration. They are very tight pads that remove very small particulate in your wine, including most yeast and bacteria. We strongly recommend that you filter with the #2 pad first before filtering with the # 3 pads.

    Quick View
  • Beer and Wine Filter Pad ..

    Beer and Wine Filter Pad ..

    $3.99

    For use with our FIL45 series of plate filters. These pads will provide between 5-7 Micron filtration.

    Each filter pad set is good for approximately 5 gallons of beer. These pads are not designed to be back flushed and reused and should be used in one session.

    Quick View
  • Beer and Wine Filter Pad ..

    Beer and Wine Filter Pad ..

    $4.99

    For use with our FIL45 series of plate filters. These pads will provide between 1-2 Micron filtration.

    Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters. These pads are designed to be thrown away after one use.

    Quick View
  • Wine Filter Pad (0.5 micr..

    Wine Filter Pad (0.5 micr..

    $4.99

    For use with our FIL45 series of plate filters. These pads will provide between .3 – .5 Micron filtration. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria – only an absolute rated .45 micron or less cartridge filter can do so. Then why do we sell this pad? Some experienced winemakers who are familiar with their wine and who do not have a cartridge filter use this pad to remove most ml bacteria, making it less likely that an unwanted ML fermentation takes place in the bottle.

    Each filter pad set is good for approximately 5 gallons of wine when the wine has already been filtered by the polish pads. These pads are disposable.

    Quick View
  • 9-10 Micron 20 cm x 20 cm..

    9-10 Micron 20 cm x 20 cm..

    $34.99$399.99

    20cm x 20cm filter pads made for 20×20 plate filters. 9-10 micron pads are considered to be a “very rough” filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 5-7 micron; or also to pre-filter white musts prior to fermentation. Please note that all pad filters are rated ‘nominal’, meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter

    Quick View
  • 2-3 Micron 20 cm x 20 cm ..

    2-3 Micron 20 cm x 20 cm ..

    $34.99$399.99

    20cm x 20cm filter pads made for 20×20 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated ‘nominal’, meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter

    Quick View
  • 1.5 Micron 20 cm x 20 cm ..

    1.5 Micron 20 cm x 20 cm ..

    $34.99$399.99

    20cm x 20cm filter pads made for 20×20 plate filters. 1.5 micron pads are for fine polishing of the wine, or for preparing wines to go through a sterile cartridge filter. Please note that all pad filters are rated ‘nominal’, meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter,

    Quick View
  • 0.8 Micron 20 cm x 20 cm ..

    0.8 Micron 20 cm x 20 cm ..

    $36.99$399.99

    20cm x 20cm filter pads made for 20×20 plate filters. 0.8 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through a sterile cartridge filter. Please note that all pad filters are rated ‘nominal’, meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter

    Quick View
  • 0.45 Micron 20 cm x 20 cm..

    0.45 Micron 20 cm x 20 cm..

    $43.99$499.99

    20cm x 20cm filter pads made for 20×20 plate filters. Pads rated 0.45 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria – only a cartridge filter can do so.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter

    Quick View
  • 5-7 Micron 20 cm x 20 cm ..

    5-7 Micron 20 cm x 20 cm ..

    $34.99$399.99

    20cm x 20cm filter pads made for 20×20 plate filters. 5-7 micron pads are considered to be a “rough” filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker’s tastes and objectives. Please note that all pad filters are rated ‘nominal’, meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through.

    The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened.

    Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the “rough” side; and the exit side has a crosshatch pattern and is commonly called the “smooth” side. For more information on how to load filter sheets into your plate and frame filter.

    Quick View
X